Bradite LS30 Low Slip Additive is to be used in conjunction with Bradite floor paints requiring a hard wearing profile via the use of a low slip additive. Incorporation of an anti-slip aggregate is essential for safety critical areas, such as external stairways, steps and floors that are frequently wet.
This aggregate is manufactured under the auspices of an ISO 9001:2008 quality & ISO 14001:2004 environmental management systems.
Follow the Product Data Sheet instructions of application of the Bradite Floor Paint required. Bradite Low Slip Soft Aggregate LS30 should be added to the paint and mixed thoroughly just before use at a rate of 1 x 250ml LS30 tin (400g) per 5 litres of paint.
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.
Anti-slip aggregate additive for floor paint, can be added to most floor paints to aid slip resistance.