Coo-Var M112/1 Profloor Anti-Slip Aggregate Component, 880g

Non Hazardous
Coo-Var Profloor Anti-Slip Aggregate Component for use with most floor paints.
Available in 800g
£14.26 £11.88
In stock
Product Description

Coo-Var M112/1 Profloor Anti-Slip Aggregate is added to paint to create a slip resistant finish to floors, ramps and stairs.

Coo-Var M112/1 Profloor Anti-Slip Aggregate Component is part of our Additives range that can be used in conjunction with paints to create a non slip surface.

Best Uses

Coo-Var M112/1 Profloor Anti-Slip Aggregate Component can be used with garage floor paints or patio and driveways paints and in areas where surfaces can become slippery.


Coo-Var M112/1 Profloor Anti-Slip Aggregate Component can be mixed directly into the chosen product or scattered across the wet surface to produce a broadcasted anti-slip finish on floors. Each pack contains 880g and has a theoretical coverage rate of 20m2. Alternatively, an 880g pack is required for every 5kg pack of Profloor purchased for the first coat.

Surface and Environment

Coo-Var M112/1 Profloor Anti-Slip Aggregate Component can be used on almost any surface internally and externally, providing the paint product meets the surface specifications.

Technical Details

Components: Single Pack
Type: Aggregate (0.25 - 0.39mm)
Finish: n/a
Stock Colours: Neutral
Tintable: No
VOC Content: n/a
Volume Solids: n/a
Suitable Substrates: Used to create anti slip element to pro-floor finish
Application Method: Scattering 
Theoretical Coverage: 20 m2 per can to be scattered evenly
Wet Film Thickness (WFT): n/a
Dry Film Thickness (DFT): n/a
Cleaner / Thinner: n/a
Shelf Life: -
Packaging: Available in 800g

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use