Mapei's quartz sand range is made from highly pure, washed, kiln-dried, selected quartz. It is available in various mixes in a granulometric curve and is used with epoxy or polyurethane resin to create protective coatings, for grouting and repair work, etc.
Mapei Quartz Sand is ideal to make resin mortar for screeds or repairing floors. It is also ideal for making self levelling resin mortars and skimming mortars for cementitious surfaces. You can also use Mapei Quartz Sand by broadcasting the surface of a resin with the grain in a multi layered coating system or to create a anti slip surface finish.
Mix the quartz sand with epoxy or polyurethane resin to create self-levelling resin coatings, broadcast systems or mortar screeds. It may also be used to make resin mortar for grouting, to repair joints or holes in floors, patches, coves, etc. Lastly, quartz sand may be used to broadcast the surface of fresh resin to increase its overall thickness and to form a rough finish on the surface when a non-slip finish is required, or if you need to form a keying surface for other layers of resin or cementitious products.
To help choose the correct mix of sand and for information on how to apply the sand and its relative consumption rates, please refer to the specific Technical Data Sheet for the resin or cementitious product to be applied.
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.
Anti-slip aggregate additive for floor paint, can be added to most floor paints to aid slip resistance.
Non-skid additive, can be added directly to the liquid coating or broadcast over the final wet finish.
Coo-Var Profloor Anti-Slip Aggregate Component for use with most floor paints.
Can be added to other EpoxyShield floor coating systems to create a non slip surface suitable for use in garages, and light industrial ...