Centrecoat MMA FR (Fire Resistant) Sealer is formulated as a sealer for Centrecoat MMA FR Smooth Screed.
The application of Centrecoat MMA FR Sealer is recommended to reduce any tendency towards staining and dirt pick up, and thereby ensure optimum ease of cleaning of the Methacrylate resin floor system.
Previously applied MMA systems should have been allowed to cure for a minimum of 1 hour at 20°C. Centrecoat MMA FR Sealer is supplied as a two
pack material consisting of: a BASE component and a CATALYST component. Add the CATALYST component to the BASE component and mix thoroughly, preferably by mechanical means.
Apply by short nap perlon, or smooth lambswool rollers, at a nominal rate of 0.3 – 0.6kg/m2, depending on surface profile. A second coat applied at the same rate is
recommended where aggressive chemicals or heavy wear will be encountered.
Clean equipment immediately after use using Centrecoat MMA Tool Cleaner.
|Suitable Substrates:||As a sealer for Centrecoat MMA FR Smooth Screed|
|Application Method:||Short nap perlon, or smooth lambswool roller|
|Theoretical Coverage:||A 5kg pack will be sufficient to treat an area of 16.7m2 with a single coat of sealer at 0.3kg/m2.|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):|
|Pot Life:||15 minutes at 20°C|
|Light Foot Traffic:||1 hour at 20°C|
|Vehicle Traffic:||2 hours at 20°C|
|Full Chemical Resistance:||24 hours at 20°C|
|Cleaner / Thinner:||Clean equipment immediately after use using Centrecoat MMA Tool Cleaner|
|Shelf Life:||Store in cool dry conditions, out of direct sunlight, at temperatures between 10°C and 25°C. Adequate ventilation of the storage area should be provided. Keep containers tightly closed when not in use. Centrecoat MMA FR Sealer has a minimum shelf life of 6 months when stored in original, unopened containers, in accordance with manufacturer’s instructions.|
|Packaging:||Available in 5 Kg|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.