£7.75 delivery on orders excluding certain products & postcodes *
Centrecoat MMA Tool Cleaner is suitable for cleaning equipment after using Centrecoat MMA products. Centrecoat MMA Tool Cleaner is also suitable for uncured MMA resin removal and paint and graffiti removal.
Centrecoat MMA Tool Cleaner has a low evaporation rate, mild odour and low toxicity, making it much more user friendly than other commonly used solvents. Centrecoat MMA Tool Cleaner is also largely biodegradable and photochemically non-reactive, and therefore more acceptable from an environmental point of view.
Try on a small area first. Clean tools immediately after use of Centrecoat MMA products.
Components: | One Pack |
Type: | Cleaner |
Finish: | |
Stock Colours: | Clear |
Tintable: | No |
VOC Content: | |
Volume Solids: | |
Suitable Substrates: | Plaster Work, Hardwoods, Softwoods, Concrete, Aluminium, Stainless Steel, Powder Coatings, PVCu Windows, Doors etc. |
Application Method: | Brush, Roller or Airless Spray |
Theoretical Coverage: | 12 m2/L/coat |
Wet Film Thickness (WFT): | 75 - 100 microns/coat |
Dry Film Thickness (DFT): | 35 microns per/coat |
Induction Time: | - |
Pot Life: | - |
Surface Dry: | 30 minutes at 20°C |
Overcoatable: | After 1 hour minimum at 23°C |
Fully Cured: | 7 days at 20°C |
Cleaner / Thinner: | Partly water soluble |
Shelf Life: | Store in dry conditions, out of direct sunlight, at temperatures between 10°C and 25°C. Centrecoat MMA Tool Cleaner has a minimum shelf life of 12 months when stored in original, unopened containers in accordance with manufacturer’s instructions. |
Packaging: | Available in 5 Litres |
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.