Centrecoat MMA Road Line Concrete Grade

SKU
ID24297
Part A: UN1866 (Class: 3, Pk Grp: II), Part B: UN3106 (Class: 5.2)
A two pack, fast curing flexible coating for concrete surfaces offering excellent slip resistance.
Available in 5 Kg. Tintable to thousands of RAL and BS Colours.
From £81.54 £67.95
In stock
Only %1 left
Product Description

Centrecoat MMA Road Line Concrete Grade is a two pack, fast curing flexible coating for concrete surfaces offering excellent slip resistance. Suitable for infilling concrete parking bays, filling step edges or for underground car park walkways.

Best Uses

Centrecoat MMA Road Line Concrete Grade is formulated to provide a slip resistant seamless floor finish with protective & decorative properties. This flexible coating is enhanced by the incorporation of blended slip resistant aggregates premixed in the resin.

As Centrecoat MMA Road Line Concrete Grade offers a fast return to service, this coating is ideal for full covering of areas such as car parking bays, filling step edges and designating walkways on concrete communal areas such as underground car parks.

  • Slip resistant
  • Rapid curing minimises down times
  • Tough and abrasion resistant
  • Easily applied, no primer required
  • Cures at low temperatures
  • Flexible
  • Range of colours

This coating can also be used on correctly prepared steel surfaces. Contact our technical team for more information.

Application

Concrete surfaces must be clean, dry and free from contaminants. New concrete substrates must be allowed to cure for a minimum period of 28 days. Mechanical preparation by vacuum shot blasting/grit blasting is recommended when the material is being applied to concrete or steel surfaces to provide a mechanical ‘key’.

Primer not normally required. Porous Concrete substrates may be primed with Centrecoat MMA Multi-Use Primer.

Centrecoat MMA Road Line Concrete Grade is supplied as a two pack material consisting of the BASE component, and the CATALYST component. Incorporate the CATALYST component under mechanical stirring and mix for 1-2 minutes.

Apply using short nap perlon, smooth lambswool rollers or squeegee at a nominal rate of 1-2kg/m2. On porous or open surfaces a second coat may be required.

Technical Details
Components: Two Pack
Type: Solvent Based
Finish: Textured
Stock Colours: Grey and Yellow
Tintable: Yes, to most RAL or British Standard codes. Please note, bespoke tints are non refundable / exchangeable
VOC Content:  
Volume Solids:  
Suitable Substrates: Concrete floors. Also suitable for correctly prepared steel floors
Application Method: Short Nap Perlon, Smooth Lambswool Rollers or Squeegee
Theoretical Coverage:

1-2kg per m2

A 10kg pack will be sufficient to coat an area of 10m2 at a rate of 1kg per m2.

Wet Film Thickness (WFT):  
Dry Film Thickness (DFT):  
Induction Time: -
Pot Life: 15 minutes at 20°C
Light Foot Traffic: 1 hour @ 20°C
Vehicle Traffic: 2 hours @ 20°C
Fully Cured: 24 hours @ 20°C
Cleaner / Thinner: Clean equipment with Centrecoat MMA Tool Cleaner immediately after use.
Shelf Life: Store in dry conditions, out of direct sunlight, at temperatures between 10°C and 20°C. Adequate ventilation of the storage area should be provided. Keep container tightly closed when not in use Shelf life of six months when stored in original, unopened containers in accordance with manufacturer’s instructions.
Packaging: Available in 5 Kg
Product Video

Related Products