£7.50 delivery on orders excluding certain products & postcodes *

Sales & Technical 01462 421 333
Search
My Cart

Centrecoat MMA Flex Concrete Grade

SKU
id24253
Part A: UN1866 (Class: 3, Pk Grp: II), Part B: UN3106 (Class: 5.2)
A two pack, fast curing flexible coating for line marking paint for concrete surfaces.
Available in 5 Kg
From £76.31 £63.59
In stock
Only %1 left
main product photo
Product Description

Centrecoat MMA Flex Concrete Grade is a two pack, fast curing flexible coating for line marking paint for concrete surfaces, following suitable preparation and priming.

Best Uses

Centrecoat MMA Flex Concrete Grade is formulated to provide a dust free, seamless line marking for protective and decorative properties.  Centrecoat MMA Flex Concrete Grade can be enhanced by the incorporation of suitable anti slip dressing aggregate. Allows a fast return to service.

  • Tough and abrasion resistant
  • Very good chemical resistance
  • Rapid curing minimises down time
  • Easily applied
  • Hygienic and easily cleaned
  • Cures at low temperatures
  • Flexible
  • Range of decorative colours

Application

Supplied as a two pack material consisting of the RESIN component, and the CATALYST component. Incorporate the CATALYST component under mechanical stirring and mix for 1-2 minutes.

Apply Centrecoat MMA Flex Concrete Grade using short nap perlon or smooth lambswool rollers.  Should a slip resistant finish be required then broadcast an appropriate aggregate onto the first coat within 10 minutes of application.  Following a minimum of 1 hour, sweep off excess aggregate, and apply a second coat of Centrecoat MMA Flex Concrete Grade.

Technical Details
Components: Two Pack
Type: MMA
Finish:
Stock Colours: Grey and Red
Tintable: Yes, to most RAL or British Standard codes. Please note, bespoke tints are non refundable / exchangeable
VOC Content:
Volume Solids:
Suitable Substrates: Concrete
Application Method: Short nap perlon or smooth lambswool roller
Theoretical Coverage: 1 Kg per m2
Wet Film Thickness (WFT):
Dry Film Thickness (DFT):
Induction Time: -
Pot Life: 15 minutes at 20°C
Light Foot Traffic: 2 hours at 20°C
Overcoatable: -
Fully Cured: 24 hours at 20°C
Cleaner / Thinner: Clean equipment with Centrecoat MMA Tool Cleaner immediately after use.
Shelf Life: Minimum shelf life of six months when stored in original, unopened containers in accordance with manufacturer’s instructions.
Packaging: Available in 5 Kg
Product Data Sheet (78.25 kB)
Safety Data Sheet - Part A (316.27 kB)
Safety Data Sheet - Part B (432.26 kB)

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use