SKU: ID23528
Part A: UN1866 (Class: 3, Pk Grp: II), Part B: UN3106 (Class: 5.2)

Centrecoat MMA Asphalt Primer

A substrate specific primer for tarmac and asphalt, being used prior to any suitable Centrecoat MMA product.
Available in 5 Kg
* These colours are for guidance only. Variations between output devices can misrepresent the appearance of an actual colour. Also, we strongly advise that you order your complete paint requirements simultaneously to ensure a uniform batch colour.
3. Select a Qty
As low as:
£113.28
Inc VAT £135.94
PRODUCT DETAILS

Centrecoat MMA Asphalt Primer has been developed as a substrate specific primer for Tarmac and Asphalt, being used prior to any suitable Centrecoat MMA product.

Best Uses

Centrecoat MMA Asphalt Primer exhibits excellent adhesion to tarmac and asphalt, and the fast curing characteristics allow rapid application of subsequent Centrecoat MMA coatings, mortars or screeds. Centrecoat MMA Asphalt Primer is supplied as a two pack material, comprising pre-weighed amounts of Base and Catalyst components.

Application

New Tarmac shall be allowed to weather for at least 1 month, or until there is no evidence of residual flux oils. Tarmac and asphalt surfaces shall be washed with detergent and water and allowed to dry. Extremely smooth asphalt may require some light texturing by mechanical means.

Pour the contents of the Catalyst container into the Base container and thoroughly mix, preferably by mechanical means.

Apply by squeegee to distribute evenly over the floor, and then use a long nap lambswool roller to achieve a nominal application rate of 0.25-0.30 Kg per m2. Allow to cure for a minimum of 1 hour prior to applying any other suitable Centrecoat MMA product.

Clean equipment with Centrecoat MMA Tool Cleaner immediately after use.

TECHNICAL
Components: Two Pack
Type: MMA
Finish:
Stock Colours: Straw
Tintable: No
VOC Content:
Volume Solids:
Suitable Substrates: Asphalt and Tarmac
Application Method: Squeegee and Long Nap Lambswool Roller
Theoretical Coverage: 0.25 - 0.30 Kg per m2
Wet Film Thickness (WFT):
Dry Film Thickness (DFT):
Induction Time: -
Pot Life: 10 - 15 minutes at 20°C
Surface Dry:
Overcoatable: After 1 hour minimum at 20°C
Fully Cured:
Cleaner / Thinner: Clean equipment with Centrecoat MMA Tool Cleaner immediately after use.
Shelf Life: Store in dry conditions, out of direct sunlight, at temperatures between 10°C and 20°C.  Adequate ventilation of the storage area should be provided. Keep container tightly closed when not in use. Centrecoat MMA Asphalt Primer has a minimum shelf life of 12 months when stored in original, unopened containers in accordance with manufacturer’s instructions.
Packaging: Available in 5 Kg

RELATED PRODUCTS

Navigating through the elements of the carousel is possible using the tab key. You can skip the carousel or go straight to carousel navigation using the skip links.
Centrecoat MMA Deck Coat
A 3 pack methacrylate resin system. Imparts toughness, resilience and waterproofing properties to the cured membrane.
From £149.60
(£179.52 Inc VAT)
Centrecoat MMA Flex
From £77.49
(£92.99 Inc VAT)
Centrecoat MMA Flex Concrete Grade
From £82.13
(£98.56 Inc VAT)
Walther Strong Utility Duct Tape
From £3.90
(£4.68 Inc VAT)
Centrecoat MMA Joint Seal
From £38.94
(£46.73 Inc VAT)
RODO Paddle Mixer
From £4.38
(£5.26 Inc VAT)