Centrecoat MMA Clear Sealer

SKU
id23532
Part A: UN1866 (Class: 3, Pk Grp: II), Part B: UN3106 (Class: 5.2)
A 2 pack, fast curing, clear sealer used as the finish coat for flooring products from our MMA range.
Available in 5 Kg
£118.94 £99.12
In stock
Product Description

Centrecoat MMA Clear Sealer is a two pack, easy to apply, fast curing, clear sealer designed to be used as the finish coat for flooring products in the Centrecoat MMA range.

Best Uses

The application of Centrecoat MMA Clear Sealer as a sealing coat is recommended to reduce any tendency towards staining and dirt pick up, and thereby ensure optimum ease of cleaning of your Centrecoat Methacrylate resin floor system.

Centrecoat MMA Clear Sealer is typically used as a sealer for Centrecoat MMA Smooth Screed, Centrecoat MMA Quartz Screed etc. Please note, Centrecoat MMA Deck Coat requires a flexible grade sealer, Centrecoat MMA Flexible Clear Sealer.

  • Ultra fast curing
  • Easy to apply
  • Chemical and abrasion resistant
  • Hygienic and easily cleaned
  • Thermal shock resistant
  • Excellent resistance to dilute acids and alkalis, oil, petrol, diesel, vegetable oils and fruit juices

Application

Previously applied Centrecoat MMA systems should be allowed to cure for a minimum of 1 hour @ 20°C. Centrecoat MMA Clear Sealer is supplied as a two
pack material consisting of: a BASE component and a CATALYST component. Add the CATALYST component to the BASE component and mix thoroughly, preferably by mechanical means.

Apply by short nap perlon, or smooth lambswool rollers, at a nominal rate of 0.3 - 0.6 Kg per m2, depending on surface profile. A second coat applied at the same rate is recommended where aggressive chemicals or heavy wear will be encountered.

Clean equipment immediately after use using Centrecoat MMA Tool Cleaner.

Technical Details
Components: Two Pack
Type: MMA
Finish:
Stock Colours: Clear
Tintable: No
VOC Content:
Volume Solids:
Suitable Substrates: For use over Centrecoat MMA products as part of a system
Application Method: Short Nap Perlon, Smooth Lambswool Roller
Theoretical Coverage: 0.3 - 0.6 Kg per m2, depending on surface profile.
Wet Film Thickness (WFT):
Dry Film Thickness (DFT):
Induction Time: -
Pot Life: 15 minutes at 20°C
Light Foot Traffic: 1 hour at 20°C
Vehicular Traffic: 2 hours at 20°C
Full Chemical Resistance: 24 hours at 20°C
Cleaner / Thinner: Clean equipment immediately after use using Centrecoat MMA Tool Cleaner
Shelf Life: Store in cool dry conditions, out of direct sunlight, at temperatures between 10°C and 25°C. Adequate ventilation of the storage area should be provided. Keep containers tightly closed when not in use. Minimum shelf life 6 months when stored in original, unopened containers, in accordance with manufacturer’s instructions.
Packaging: Available in 5 Kg

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Related Products