Part A: UN1866 (Class: 3, Pk Grp: II), Part B: UN3106 (Class: 5.2), Part C: Non Hazardous
Centrecoat MMA Fire Resistant Smooth Screed
A very fast curing fire resistant and slip resistant coating offering a full return to service after just 2 hours.
Available in 20 Kg. Tintable upon request.
3. Select a Qty
As low as:
£254.88
Inc VAT£305.86
As low as:
Inc VAT
PRODUCT DETAILS
Centrecoat MMA Fire Resistant Smooth Screed is a fast drying floor finish with a quick return to service. Foot traffic can return in 1 hour, with a full return to service after just 2 hours. Ideal for use where hygiene and ease of maintenance are important.
Best Uses
With its combination of attractive finish and excellent resistance to a variety of chemicals, Centrecoat MMA FR (Fire Resistant) Smooth Screed is suitable for a wide range of light industrial environments. The floor coating exhibits very fast curing characteristics allowing a full return to service after 2 hours. Centrecoat MMA FR Smooth Screed is fire resistant.
Fast cure and return to service
Very good chemical resistance
Hard wearing
Excellent abrasion resistance
Hygienic and easily cleaned
Range of slip resistant finishes possible
Slip resistance results Dry PTV 75 Wet PTV 60
Sound adhesion to concrete and metal substrates
Easily applied
Suitable for wet and dry areas
Centrecoat MMA FR Smooth Screed is suitable for use in environments where a fire resistant, tough, impervious, chemical resistance floor finish is required. Centrecoat MMA FR Smooth Screed is also ideal as a floor screed where hygiene and ease of maintenance are important e.g. food and beverage production, hospitals, canteens and kitchens, pharmaceutical plants, laboratories, etc. and in manufacturing industries where a fast return to service and minimal down times are essential.
Application
Concrete surfaces shall be a minimum of 21 days old and/or the residual moisture content shall be below 6%. Ensure that the concrete is clean and free from dust, laitance, grease, oil, curing compound, and existing paint finishes, etc. Blow holes and defective concrete shall be made good using a proprietary repair compound e.g. Centrecoat MMA Repair Mortar.Suitable mechanical treatment, such as vacuum grit blasting, is the preferred treatment prior to application as this ensures a mechanical ‘key’ which will optimise adhesion.
Steel surfaces shall be shot blasted or grit blasted to a nominal Sa 2.5 Swedish Standardand with a medium blast profile. All dust shall be removed prior to coating application. A coat of Centrecoat MMA Steel Primer shall be applied as soon as practicable after blasting, in order to obviate the possible occurrence of ‘flash rusting’.
Centrecoat MMA FR Smooth Screed is supplied as a three pack material consisting of the Base component, the Catalyst component, and the Filler component. Mix the BASE component and the CATALYST component thoroughly by mechanical means and then add the FILLER component, mix thoroughly until a uniform consistency is achieved.
Pour the mixed material onto the prepared and pre-primed surface, and apply by serrated trowel or screed box to the desired thickness. De-aerate the screed by spike rollering. Note: Existing joints in the floor must be carried through the screed. If a more slip resistant finish should be required, then a suitable aggregate shall be broadcast whilst the screed is still wet and a suitable sealer coat subsequently applied.
Store in dry conditions, out of direct sunlight, at temperatures between 10°C and 20°C. Adequate ventilation of the storage area should be provided. Keep container tightly closed when not in use Centrecoat MMA FR Smooth Screed has a minimum shelf life of 6 months when stored in original, unopened containers in accordance with manufacturer’s instructions.
Navigating through the elements of the carousel is possible using the tab key. You can skip the carousel or go straight to carousel navigation using the skip links.
Press to skip carousel
