Centrecoat Power Floated Concrete Protector provides an easy to apply, heavy duty, clear protective barrier to polished concrete floors.
Centrecoat Power Floated Concrete Protector penetrates deep into the pores of cementitious substrates completely lining the pores and forming a thin, glossy film barrier on the surface. Once cured, cleaning fluids and waste are unable to penetrate the surface thus delivering a highly effective stain protection. Stains that have been left for lengthy periods can be easily removed, as they will have remained on the surface rather than soaking into the substrate.
Centrecoat Power Floated Concrete Protector is formulated as a high solids, alpha-silane-terminated polyether base with added alpha-silane. Centrecoat Power Floated Concrete Protector chemically provides a cross linking moisture curing chemical structure. It has been optimised to achieve low viscosity together with a high solids content.
This concrete floor protector is ideal for use in warehouses where liquids such as oil can stain concrete, brewery floors, dairies, storage areas and more.
Ensure the surface is thoroughly cleaned and free of any dust. The substrate must be completely dry at the surface prior to application. Always test on a small hidden portion of the substrate. Stir well before use. Apply the product to a clean and dry surface. Use either a roller (not foam as this can cause bubbles) or pressure sprayer. Ensure an even and generous application is made.
Allow 24 hours before a second coating is applied. After application keep vehicles and foot traffic off the floor until completely cured. Clean tools and equipment immediately after use with mineral spirits.
Any ongoing maintenance should be regular cleaning of stains and markings. Centrecoat Power Floated Concrete Protector is a very durable product, but as with any other external product it will require re-application from time to time.
|Type:||Alpha Silane Terminated Polyether Base|
|Volume Solids:||High Solids|
|Suitable Substrates:||Power Floated Concrete Floors|
|Application Method:||Roller or Pressure Spray|
|Theoretical Coverage:||Typically 10-13 m2 per litre , and on exceptionally smooth concrete surfaces up to 16m2 per litre|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Overcoatable:||After 24 hours at 20°C|
|Cleaner / Thinner:||Clean tools and equipment immediately after use with mineral spirits|
|Shelf Life:||Store away from frost and heat in a dry place, temperature between 5°C and 30°C. Shelf life is 24 months from the production batch date when kept in the original unopened container|
|Packaging:||Available in 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.