Centrecoat Renovation Solar Reflective Paint

Centrecoat Renovation Solar Reflective Paint is an aluminium modified bituminous formulation, that works as an additional waterproof protective layer for bituminous systems. It helps extend the life of the overall roofing system by protecting the roof from UV degradation. 

Best Uses

Renovation Solar Reflective Paint is used as an additional waterproof protective layer for ageing bituminous roof systems. It provides longer lasting protection against UV degradation,

Application

Clear all areas of moss, lichen and debris by brushing or power washing and remove any remaining surface water and contamination, such as oil or grease, and allow to dry. To prevent further fungal/algal growth, we recommend applying Centrecoat GS36 Fungicidal Wash. 

Repair any holes or cracks prior to application.

Once the surface is cleaned and dry, stir Centrecoat Renovation Solar Reflective Paint thoroughly with a paddle mixer, and apply by brush or solvent resistant roller. 

Highly Porous / Friable Surfaces
If possible, thin by 5% on the 1st coat, then apply an unthinned coat of Centrecoat Renovation Solar Reflective Paint. Once dry apply the second coat at right angles to the first (but it is not essential to do so).

Metal Surfaces
Ferrous-New, Weathered and previously painted galvanised iron and steel.
Non-Ferrous Metals - Aluminium sheeting & Aluminium Alloy Box gutters and previously painted non-Ferrous Metals.

For long term protection, these areas should be suitably prepared and primed as appropriate (see separate technical sheet) before application of Centrecoat Renovation Solar Reflective Paint.

Non-Porous Substrates
Slate, polished bricks should be power washed abraded and completely dry, free from any contamination to achieve adhesion of the Centrecoat Renovation Solar Reflective Paint.

New Bitumen Surfaces
If applying to a newly applied solvent based bituminous surface, then allow for a minimum of 3 days weathering BEFORE application of Centrecoat Renovation Solar Reflective Paint.

New Water Based Protective Coating
If applying to a newly applied water based protective coating, then allow for a minimum 14 days weathering BEFORE application of Centrecoat Renovation Solar Reflective Paint.

Air conditioning vents should be sealed for a minimum of 24 hours during and after the
application.

For full application details, please read the product data sheet prior to applying this product.