£9.95 delivery on orders excluding certain products & postcodes *
Coo-Var Prime-All is a multi-surface primer / sealer produced with low odour solvents. Gives exceptional coverage to a multitude of stains, helping to prevent it bleeding through the finishing coat.
Coo-Var Prime-All is a coating which offers exceptional stain blocking and alkali resisting properties across substrates such as tiles, wood, metal (including galvanised), plaster, existing paint, masonry and most plastics. Suitable for interior or exterior use.
All surfaces should be clean, dry, sound and free from oil and dirt. Wire brush or sand surface to remove any loose / flaking material and rust. Apply using brush or roller. Do not thin. Mix well before use. Clean tools with Thinners 18 or LO White Spirit. Test before use.
Components: | One Part |
Type: | Solvent Based |
Finish: | Matt |
Stock Colours: | White |
Tintable: | No |
VOC Content: | 499.0g per Litre |
Volume Solids: | 36% |
Suitable Substrates: | For tiles, wood, metal (including galvanised), plaster, existing paint, masonry and most plastics |
Application Method: | Brush, Roller |
Theoretical Coverage: | 10 m2 per litre at 40 microns |
Wet Film Thickness (WFT): | 100 microns |
Dry Film Thickness (DFT): | 35 - 40 microns |
Induction Time: | - |
Pot Life: | - |
Touch Dry: | 30 minutes at 20°C |
Overcoatable: | After 4 - 6 hours at 20°C |
Fully Cured: | 3 - 5 days at 20°C |
Cleaner / Thinner: | Teamac Thinners 18 or LO white spirit |
Shelf Life: | 2 years unopened in original packaging |
Packaging: | Available in 1, 2.5 and 5 Litres |