Coo-Var Anti Condensation Paint helps prevent condensation forming on walls and ceilings in moisture prone areas such as kitchens and bathrooms. Contains a biocidal product for the preservation of the paint film and to reduce discolouration.
Coo-Var Anti Condensation Paint is an ideal white paint for the painting of moisture prone walls and ceilings in bathrooms, kitchens, wet rooms and indoor swimming pools. Coo-Var Anti Condensation is especially effective in rooms prone to airborne moisture such as bathrooms, wet rooms, communal shower/changing rooms and kitchens.
This product contains a biocidal product for the preservation of the dry film and to reduce discolouration.
For interior use only. This anti-condensation paint can be left as a topcoat or overcoated with emulsion.
All surfaces should be clean, dry, sound and free from contaminants and grease. Scrape and brush the surface to remove any loose flaking material. Flat down glossy surfaces with abrasive paper. Treat any mould or lichen with a proprietary mould remover with a scraper or a stiff brush then treat again.
Prime bare metal areas with Coo-Var All Metals Primer. Apply using brush or roller. Mix well prior to use.
|VOC Content:||30.0g per Litre|
|Suitable Substrates:||For internal walls and ceilings|
|Application Method:||Brush, Roller|
|Theoretical Coverage:||8 - 10 m2 per litre at 40 - 50 microns|
|Wet Film Thickness (WFT):||100 - 125 microns|
|Dry Film Thickness (DFT):||40 - 50 microns|
|Touch Dry:||2 hours at 20°C|
|Overcoatable:||After 4 hours at 20°C|
|Fully Cured:||3 - 5 days at 20°C|
|Cleaner / Thinner:||Water|
|Shelf Life:||2 years in original unopened containers|
|Packaging:||Available in 2.5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.