Coo-Var Water Based Matt Black

Non Hazardous
A high opacity flat black acrylic coating for metal, wood, cement and masonry.
Available in 1, 2.5 and 5 Litres
From £20.16 £16.80
In stock
Only %1 left
Product Description

Coo-Var Water Based Matt Black is a high opacity flat black acrylic coating for interior metal, wood, cement and masonry.

Best Uses

Coo-Var Water Based Matt Black provides a flat black finish in dark rooms. Good on beams, wrought iron work or cement and masonry where a matt black finish is required.


Ensure all surfaces are clean, dry and free from grease, oil and any other contaminates. Use Coo-Var Masonry Stabiliser on unstable brick, screed or plaster prior to painting. Existing painted surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced. Remove all loose, flaking material and treat bare areas as new substrate then prepare accordingly.

Apply direct on to wood and concrete. On metal use Coo-Var Water Based All Metals Primer.

Mix well before use. Apply via brush or roller.

Technical Details
Components: Single Pack
Type: Water Based
Finish: Matt
Stock Colours: Black
Tintable: No
VOC Content: 30 g/L
Volume Solids: 36%
Suitable Substrates: Wood, Metal, Cement, Masonry
Application Method: Brush, Roller
Theoretical Coverage: 10 m2 per litre at 40 microns
Wet Film Thickness (WFT): 100 microns
Dry Film Thickness (DFT): 35 - 40 microns
Induction Time: -
Pot Life: -
Surface Dry: 30 minutes at 20°C
Overcoatable: After 6 hours at 20°C
Fully Cured: 5 - 7 days at 20°C
Cleaner / Thinner: Water
Shelf Life: 2 years minimum in original unopened containers
Packaging: Available in 1, 2.5 and 5 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Related Products