FLAG High Gloss Exterior Yacht Varnish

SKU
id3721
UN1263 (Class: 3, Pk Grp: III)
A flexible product that allows wood to expand and contract, preventing cracking and flaking in the wood.
Available in 1 Litre
£16.20 £13.50
In stock
Product Description

FLAG High Gloss Exterior Yacht Varnish is a high gloss exterior grade UV resistant varnish formulated from high grade oils and resins to use on boat and ships timber above the waterline.

FLAG High Gloss Exterior Yacht Varnish is a flexible product that allows wood to expand and contract, preventing the moisture levels in the wood from causing cracking and flaking in the wood.

Best Uses

FLAG High Gloss Exterior Yacht Varnish is best suited for marine application and should be used to properly prepare yachts and boats prior to use at sea. It is important for your yachts and boats to have the utmost protection, as well as a high level of decoration, to help protect the surface against abrasion and weathering. Not only can FLAG High Gloss Exterior Yacht Varnish be used for Marine application, but this high performance varnish can also be used in everyday life around the home and in the garden.

Application

FLAG High Gloss Exterior Yacht Varnish can be applied using a brush or by conventional and airless spray and when applied offers a theoretical coverage rate of 16m2 per litre. FLAG High Gloss Exterior Yacht Varnish is dry to touch in 1-2 hours and can be over coated after 16 hours.

Surface and Environment

FLAG High Gloss Exterior Yacht Varnish is designed for exterior use and has been specifically manufactured for use on Yachts, Boats and Marine Applications. FLAG High Gloss Exterior Yacht Varnish offers the correct mix of oils to provide all exterior woods with flexibility that helps prevent against the damage that moisture and UV light can cause.

Technical Details

Notes

  • High gloss clear varnish that offers the correct mix of oils to provide flexibility for exterior use where wood can expand or contract according to temperature or moisture content
  • Flag Yacht Varnish offers good UV resistance, but is hard enough to take the knocks and bangs of everyday boating

Technical Info

Components: One Part
Type: Solvent Based Varnish
Finish: Gloss
Stock Colours: Clear
Tintable: No
VOC Content: -
Volume Solids: 42%
Suitable Substrates: For above the waterline on yachts
Application Method: Brush, Conventional or Airless Spray
Theoretical Coverage: 16 m2 per litre
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): -
Induction Time: -
Pot Life: -
Touch Dry: 1 - 2 hours at 20°C
Overcoatable: After 16 hours at 20°C
Fully Cured: -
Cleaner / Thinner: White Spirit
Shelf Life: 2 years unopened in original packaging
Packaging: Available in 1 Litre

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use