Coo-Var G139 Suregrip Anti Slip Floor Paint

SKU
ID690
UN1263 (Class: 3, Pk Grp: III)
Coo-Var Suregrip Non Slip Floor Paint (interior and exterior) provides a rough non slip coating to floors and decks.
Available in 1, 2.5 and 5 Litres
From £33.91 £28.26
In stock
Only %1 left
Product Description

Coo-Var Suregrip is a ready mixed anti-slip floor paint for floors, ramps, steps and jetties.

Coo-Var Suregrip is a ready mixed anti-slip floor paint comprising of a professionally dispersed combination of resins bonded to aggregates which provides a rough non slip coating to floors. It gives a high degree of durability and decoration not often found in similar non slip paints.

Best Uses

Coo Var G139 Suregrip Anti Slip Paint is suitable for interior and exterior use and for foot and light truck traffic. Ideal for critical areas like doorways, doorsteps, staircases, fire escapes, stairways, wheelchair ramps, care homes, marinas, decking including boat decks, around machinery or anywhere where moisture and other substances may cause the floor to be slippery (even as a high grip surface on climbing walls).

  • Suregrip can be used on top of floor Paint to provide non slip areas.
  • Suregrip can be applied to concrete, wood and metal.
  • Smooth surfaces should be roughed to provide a key.
  • Clean surface with Coo-Var universal Cleaner / Degreaser.
  • Primers, Wood use Coo-Var Penetrating Wood Primer, Ferrous Metal, Coo-Var Zinc Phosphate Metal Primer.
  • Concrete, 10% thinned Coo-Var Floor Paint or Coo-Var Alkali Resisting Primer.
  • Not suitable for continuous use by fork lift trucks.

Application

Coo Var G139 Suregrip should be applied using brush or roller and is touch dry within 6 hours. After 16 hours you will be able to recoat and after a further 24 hours your product will reach full hardness. Make sure when you are applying Suregrip that the area is well ventilated.

Surfaces/Environments

CooVar Suregrip is a safety coating suitable for indoor and outdoor use where a sure foothold is required. Ideal for boats, steps and stairways, disabled ramps, doorways, machinery areas, most floors and other areas where moisture and other substances may cause the floor to be slippery. Suitable for use on suitably prepared concrete, wood, metal and GRP. For foot, light truck and occasional heavy truck use.

Technical Details

Technical Info

  • DO NOT thin
Components: One Part
Type: Solvent Based
Finish: Aggregated
Stock Colours: Blue, Red, Green, Black, Grey, White, Light Grey, Safety Yellow
Tintable: No
VOC Content: 343.0g per Litre
Volume Solids: 60%
Suitable Substrates: For indoor and outdoor primed concrete, wood, metal and GRP
Application Method: Brush, Short or Medium Roller
Theoretical Coverage: 6 - 10 m2 per litre at 60 - 100 microns DFT
Wet Film Thickness (WFT): 100 - 150 microns
Dry Film Thickness (DFT): 60 - 100 microns
Induction Time: -
Pot Life: -
Touch Dry: 6 hours at 20°C
Overcoatable: After 16 hours at 20°C
Fully Cured: 5 - 7 days at 20°C
Cleaner / Thinner: Clean up with Teamac Thinners 14
Shelf Life: 2 years unopened in original packaging
Packaging: Available in 1, 2.5 and 5 Litres
Product Data Sheet (756.97 kB)
Safety Data Sheet (213.03 kB)
System Info - Case Study (2,047.69 kB)
System Info - Flyer (1,792.84 kB)

Related Products