£7.75 delivery on orders excluding certain products & postcodes *

Sales & Technical 01462 421 333
Search
Advanced Search
My Cart

FeRFA Floor Category Coatings

FeRFA, the Resin Flooring Association, is a not-for-profit organisation representing the leading manufacturers, specialist contractors and associated companies involved in industrial and commercial resin flooring, screed and surface preparation. FeRFA do not represent the domestic/residential resin driveway industry.

Synthetic resin flooring is classified into eight specific types, each exhibiting its own particular performance characteristics. A variety of synthetic resins, typically epoxy, polyurethane and methacrylate, can be formulated to produce the different resin types.

Shop By
Filter by
  1. Manufacturer Sherwin Williams Remove This Item
Clear All
Filter by

3 Items

Set Descending Direction
  1. Sherwin Williams Resuflor HB
    Sherwin Williams Resuflor HB

    Formerly Resutop Clear / Resucoat HB. A two-pack solvent-free high-performance clear floor coating for industrial floors.

    From £120.44 £100.37
  2. Sherwin Williams Resuprime MVT
    Sherwin Williams Resuprime MVT

    A two-component epoxy resin primer that is tolerant of residual moisture in concrete floors.

    From £132.10 £110.08
  3. Sherwin Williams Resuflor HB CC
    Sherwin Williams Resuflor HB CC

    Provides a tough and durable floor protection finish, that will cure down to low temperatures.

    From £102.00 £85.00
per page

BS 8204 Part 6 Synthetic Resin Flooring Type Categorisation

BS 8204-6, Section 6.2 (following the FeRFA scheme) classifies the types, varying in thickness and surface finish:

FeRFA No Type Description Duty Typical Thickness
1 Floor Seal Applied in 2 or more coats. Generally solvent or water borne LD > 150μm
2 Floor Coating Applied in 2 or more coats. Generally solvent free LD / MD 150 - 300μm
3 High build floor coating Applied in 2 or more coats. Generally solvent free MD 300 - 1000μm
4 Multi-layer flooring Aggregate dressed systems based on multiple layers of floor coatings or flow-applied flooring, often described as sandwich systems MD / HD > 2mm
5 Flow-applied flooring Often referred to as ‘self-smoothing’ or ‘self-levelling’ flooring and having a smooth surface MD / HD 2 - 3mm
6 Resin screed flooring Trowel-finished, heavily filled systems, generally incorporating a surface seal coat to minimise porosity MD / HD > 4mm
7 Heavy duty flowable flooring Having a smooth surface HD / VHD 4 - 6mm
8 Heavy duty resin flooring Trowel-finished, aggregate filled systems effectively impervious throughout their thickness. VHD > 6mm

LD – light foot traffic, occasional rubber tyre vehicles, MD – regular foot traffic, frequent fork lift truck traffic, occasional hard plastic-wheeled trolleys, HD – constant fork lift truck traffic, hard plastic wheeled trolleys, some impact, VHD – severe heavily loaded traffic and impact