Blackfriar Floor Sealer Water Based, 5 Litres

SKU
id3849
Non Hazardous
Water Based Floor Sealer aids by penetrating, binding and sealing porous surfaces before overcoating.
Available in Clear in 5 Litres
£28.60 £23.83
In stock
Product Description

Blackfriar Floor Sealer is a water based product for use under Acrylic Floor Paint on all porous surfaces it aids the protection of floors by binding, sealing and stabilizing friable surfaces.

Blackfriar Floor Sealer, available in 5 litre containers, is a water based product that has been specially designed for use under Blackfriar Professional Acrylic Floor Paint on all porous surfaces. Blackfriar Water Based Floor Sealer aids the protection of floors by binding, sealing and stabilizing friable surfaces.

Best Uses

Blackfriar Water Based Floor Sealer has been specifically manufactured to meet the specifications of bare and concrete floors and works excellently well at penetrating deep into the surface to created a sealed coating ready for any over coat that may be applied.

Application

Blackfriar Floor Sealer is easy to apply using roller or brush and dries to a clear, glossy finish after 2-4 hours in warm conditions. Blackfriar Floor Sealer has a theoretical coverage of 10-15m2 after application, which depends on the porosity of the surface. The more porous the floor, the lower the coverage rates will be.

Surface and Environment

Blackfriar Water Based Floor Sealer can be used for interior and exterior use on all bare, concrete floors primarily but can be used on all porous surfaces too.

Technical Details

Notes

  • Blackfriar Water Based Floor Sealer aids by penetrating, binding and sealing porous surfaces for overcoating
  • Can be used as a dust proofer
  • Designed for bare / concrete floors
  • Suitable for brick, masonry and concrete surfaces

Technical Info

Components: One Part
Type: Water Based
Finish: Gloss
Stock Colours: Clear
Tintable: No
VOC Content: 140.0g per Litre
Volume Solids:
Suitable Substrates: For sealing bare and porous concrete substrates such as brick, masonry and concrete surfaces
Application Method: Brush, Roller
Theoretical Coverage: 10 - 15 m2 per litre per coat
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): -
Induction Time: -
Pot Life: -
Touch Dry: 2 - 4 hours at 20°C
Overcoatable: After 4 hours at 20°C
Fully Cured: 3 - 5 days at 20°C
Cleaner / Thinner: Water
Shelf Life: 2 years unopened in original packaging
Packaging: Available in 5 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use