Rustoleum Hard Hat 2800 Spot Marking Aerosols

SKU
id1040
UN1950 (Class: 2)
A cost-effective, multi-surface line marking spray available in a bright colour range and used by hand or machine application.
Available in 750ml Aerosols and 6 x 750ml Aerosols
From £8.82 £7.35
In stock
Only %1 left
Product Description

Rustoleum Hard Hat 2800 Spot Marking Aerosolss are suitable for use on metal, concrete, asphalt, gravel, soil and grass. Also suitable for interior applications in light, industrial exposures of normal humidity.

Rustoleum Hard Hat 2800AE is a cost effective line marking spray. Rustoleum Hard Hat 2800AE is suitable for spot marking in any direction, given its 360 degree valve system. Rustoleum Hard Hat 2800AE is available in five bright and visible colours and are touch dry in 10 minutes. These colours include, blue, green, red, yellow and white, set to RAL specifications.

Best Uses

Rustoleum Hard Hat 2800AE is suitable for use on metal, concrete, asphalt, gravel, soil and grass. The Rustoleum Hard Hat 2800AE is not water soluble. It is suitable for interior applications in light, industrial exposures of normal humidity. It provides the best results, when used with the Rust-Oleum Hard Hat Line Marking Machine, to provide more accurate lines.

Application

Rustoleum Hard Hat 2800AE is easy to apply by hand or, with the use of the hard hat line marking machine, for extra accuracy (for example, when marking lines). Remove the cover cap and shake vigorously for at least one minute after the rattle of the mixing ball is heard. Continue to shake the can frequently after use. Because of the 360 degree valve, it is not necessary to clean the spray button.

Surface and Environment

Rustoleum Hard Hat 2800AE is suitable for use on metal, concrete, asphalt, gravel, soil and grass. This aerosol is not water soluble and is for use in light industrial exposures, normal humidity and interior applications.

Technical Details

Features

  • A cost-effective line marking spray
  • For spot marking in any direction
  • 360 degree valve system

Technical Info

Components: One Part
Type: Aerosol
Finish: -
Stock Colours: RAL 1023, RAL 3020, RAL 9016
Tintable: No
VOC Content: 637.0g - 654.0g per Litre
Volume Solids: -
Suitable Substrates: For metal, concrete, asphalt, gravel, soil and grass, etc
Application Method: Aerosol
Theoretical Coverage: 2.25 m2 per Aerosol at 25 μm dry (depending on colour)
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): -
Induction Time: -
Pot Life: -
Touch Dry: 20 minutes at 20°C
Overcoatable: between 1 hour and 48 hours at 20°C
Fully Cured: 7 days at 20°C
Cleaner / Thinner: -
Shelf Life: 3 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
Packaging: Available in 750ml Aerosols and 6 x 750ml Aerosols

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use