Hatcrete Water Based Curing and Sealing Solution

Hatcrete Water Based Curing and Sealing Solution is a hard wearing sealing solution, used for improving the abrasion resistance of all forms of freshly laid or existing concrete.

Best Uses

Hatcrete Water Based Curing and Sealing Solution is ideal for internal use where solvent fumes are problematic. It is also equally effective when used externally. Hatcrete Water Based Curing and Sealing Solution is suitable for use on colour hardened concrete floors.

Application

The recommended application method when using as a curing membrane is by backpack sprayer. It can be applied by brush or roller when being used as a sealer on existing concrete. 1-2 coats required.

When used as a Curing Agent:

As soon as final finish is completed and the concrete surface is free of any bleed water, the product should be spray applied as soon as the surface has gained sufficient strength to withstand spray application without damage.

The product should be applied at a minimum of 5m² per litre in either one or two applications. If a second coat is required, you will need to allow the first coat to dry tack free prior to applying a second coat. Application rates may increase due to surface profile and uniformity of application.

When used as a Sealer:

All existing concrete surfaces should be clean, dry and free of any surface laitance. If the product is being used outside, then it must be applied when there is no chance of rain before the product has fully dried. Please note, concrete should not be sealed below 10ºC or above 30ºC.