Hempel Anti-Slint 67500

SKU
id25233
Non Hazardous
Formulated to obtain anti-skid properties on decks and other areas where a skid-proof surface is required.
Available in 2.5 Kg. Average particle size is approx 0.5mm.
£18.91 £15.76
In stock
Product Description

Hempel Anti-Slint 67500 is a flame dried silica sand formulated to obtain anti-skid properties on decks and other areas where a skid-proof surface is required.

Best Uses

Hempel's Anti-Slint 67500 has an average particle size is approximately 0.5 millimetres. This anti skid aggregate is designed to allow users to obtain anti-skid properties on decks and other areas where a skid-proof surface is required.

Part of Group Assortment. Local availability subject to confirmation. Part of Group Assortment.

Application

Being heavy and rather coarse, Hempel's Anti-Slint 67500 should not be stirred into the paint before its application. For such purpose use anti-slip beads or consult our technical team.

Hempel's Anti-Slint 67500 should be sprinkled evenly on the surface immediately upon application of the penultimate coat of the paint system while the paint is still wet.
Consumption approximately 2.5 kg of Hempel's Anti-Slint 67500 to 25m2. When the paint is dry, sweep up surplus grit and apply the final coat. Do not mix contaminated sweepings with new supplies.

Technical Details
  • Store under dry and clean conditions
  • Consumption approximately 2.5 kg of Hempel's Anti-Slint 67500 to 25m2
  • Colour: Greyish
  • Available in 2.5 Kg

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use