Hempel Hempadur Sealer 05993
Hempel Hempadur Sealer 05933 is a low viscosity, two pack epoxy varnish with good penetration properties. It is intended for use in cold/temperate climates.
Best Uses
Hempadur Sealer 05933 is recommended for saturation of well cleaned concrete surfaces before application of pigmented paints. This must be applied in such an amount that the surface is just saturated but does not appear glossy in any way.
Hempadur Sealer 05933 is also suitable for sealing of thermally sprayed metallic coatings.
Application
Application is by airless spray or brush. Remove any contaminants by emulsion washing followed by pressure hosing with fresh water.
Surface must be clean and dry before application. Use only where application and curing can proceed at temperatures above: 10°C. The minimum relative humidity should be: 30%. The temperature of the paint itself should be 15°C or above.
In confined spaces, ensure you provide adequate ventilation during application and drying.
| Components: | Two Component |
| Type: | Epoxy varnish |
| Finish: | Flat |
| Stock Colours: | Transparent |
| Tintable: | No |
| VOC Content: | 606 g/l |
| Volume Solids: | 29 ± 1 |
| Suitable Substrates: | Cement, Metal |
| Application Method: | Brush, Airless Spray |
| Theoretical Coverage: | The indicated spreading rate is 20 m2/litre, see product data sheet for further information |
| Wet Film Thickness (WFT): | n/a |
| Dry Film Thickness (DFT): | n/a |
| Induction Time: | - |
| Pot Life: | 8 hours at 20°C |
| Touch Dry: | 3-4 hours at 20°C |
| Overcoatable: | According to specification |
| Fully Cured: | 7 days at 20°C |
| Cleaner / Thinner: | Tool Cleaner 99610 / Thinner 08450 |
| Shelf Life: | See tin for shelf life and storage instructions |
| Packaging: | Available in 5 Litres |
