A two-component, polyurethane topcoat, with good gloss and colour retention. BBA Cert No. 08/H135-PS13. Highways Approved ...
Suitable for use as a finishing coat for protection of structural steel.
A two-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability.
A self-priming, two-component, high-build, pure epoxy paint, polyamide / amine curing product that is abrasion and corrosi...
A two-component semi-gloss acrylic polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour reten...
A two-component polyamide adduct-cured epoxy paint. BBA Cert. no. 08/H135-PS11. Highways Approved Item No.159.
A self-priming, two-component, high build, pure epoxy paint which cures to an abrasion and corrosion resistant coating.
A rust preventing coating for areas exposed to high abrasion.
A primer, intermediate or finishing coat in Hempatex systems in moderately corrosive environment.
A two-component, isocyanate-free, acrylic finishing coat for structural steel in severely corrosive environments.
A self-priming, two-component, high-build, pure epoxy paint.
A two-component epoxy paint, which cures to a hard and tough coating.
A self-primed, surface tolerant coating with low temperature curing properties, low VOC and high film build.
A two-component, high-gloss acrylic polyurethane enamel cured with aliphatic isocyanate, with good gloss and colour retent...
A finishing coat based on acrylic resin and non chlorinated plasticizer for optimum gloss and colour retention.
A high build epoxy coating for the protection of metal substrates against atmospheric corrosion. Network Rail Approved.
A self-priming, two-component, high build epoxy paint containing zinc phosphate.
An intermediate or finishing coat epoxy system for use in atmospheric exposures. BBA Cert No.08/H135-PS7. Highways Approve...
A protective enamel coating for structures found in severe atmospheric conditions and is Network Rail approved.
A two-component epoxy paint, which combines high volume solids with a short drying time. Contains zinc phosphate for bette...
A two-component, glossy acrylic polyurethane coating for use onto structural steel in severely corrosive environments.
A water-borne, acrylic dispersion based paint for interior and exterior moderate to sever corrosive environments.
A two component topcoat for the protection of structural steel in severely corrosive atmospheric environments.
Two component polyamide-adduct epoxy paint providing a protective coating to steel & metal surfaces in severely corrosive ...
Glossy, general purpose topcoat. For mildly to moderately corrosive environment. For exterior and interior usage.
This product has now been discontinued. Replaced with Hempathane Topcoat 55102.
Ask our Technical team a question by using the form below or call the advice line on 01462 421 333
If you should require any advice before you purchase, please call our experts who will be happy to advise which product would be most suitable for your needs
If you would like to keep up to date with our latest news and interesting articles then check out our social media...
We are always looking to improve our website, your comments good or bad are gladly welcome
Industrial Paints and Coatings
Knowl Piece Business Park
01462 421 333
Please place your orders online or if you are unable to locate a specific product or colour, please call us on
and we will be happy to help.
Whilst our aim is to continue as normal, we would however recommend that customers place orders with as much notice as possible to avoid any potential delays.
Thank you to all of our customers for your continued support.
Stay Safe and look out for each other!