£7.75 delivery on orders excluding certain products & postcodes *
Hempel Hempadur Mastic 4588W (Winter Grade)
SKU
ID23897
Part A: UN1263 (Class: 3, Pk Grp: III), Part B: UN3469 (Class: 3, Pk Grp: III)
A high build epoxy paint suited for application at low temperatures.
Available in 5 and 20 Litres
From
£67.32
£56.10
In stock
Only %1 left
Product Description
Hempel Hempadur Mastic 4588W is a two component high solids, high build epoxy paint which has a tough coating, good wetting properties and low temperature curing.
Best Uses
Hempadur Mastic 4588W can be used as a self primed paint system or as an intermediate coat in heavy-duty paint systems for atmospheric exposure, where low VOC and high film build are required.
It is suitable for application at low temperatures (to -10°C) and is ideal where a relatively short re-coating interval is required (one day, one coat).
Application
The surface should be cleaned and dried prior to application of 4588W. Ensure that all oil, grease and other contaminants are removed with a suitable detergent. Salts, detergents and other contaminants can be removed by high pressure fresh water cleaning.
Application conditions
- The temperature of the product must be above 15°C during application.
- The surface temperature must be above -10°C during application & curing.
- Apply on a clean and dry surface with a temperature that is at least 3°C above the dew point, this will help to avoid condensation.
Relative Humidity
- Relative humidity must be below 85% during drying and curing.
Suitable Thinner
Technical Details
Certificates and Approvals
- EC-type examined as a low flame spread material when used as part of a predefined paint system. Please refer to “Declaration of Conformity” for further details.
Features and Benefits
- High solids, high-build epoxy
- Hard and tough coating
- Low temperature curing (down to -10°C)
- Good wetting properties
- Low VOC
Technical Info
| Components: | Two Component |
| Type: | Epoxy |
| Finish: | Semi Gloss |
| Stock Colours: | Light grey 12170 |
| Tintable: | Yes. Please note, bespoke tints are non refundable / exchangeable |
| VOC Content: | 200 g/L |
| Volume Solids: | 80 ± 2% |
| Suitable Substrates: | For steel, concrete, metal substrates |
| Application Method: | Brush, Airless Spray |
| Theoretical Coverage: | 4 m²/L |
| Wet Film Thickness (WFT): | 250µm |
| Dry Film Thickness (DFT): | 200µm |
| Induction Time: | - |
| Pot Life: | Spray: 60 minutes at 20°C, Brush: 2 hours at 20°C |
| Touch Dry: | 2.5 hours at 20°C |
| Hard Dry: | 3.5 hours at 20°C |
| Overcoating: | See product data sheet |
| Cleaner / Thinner: | Tool Cleaner 99610 / Thinner 08450 |
| Shelf Life: | Base: 3 years, Curing agent: 12 months - both unopened and stored correctly |
| Packaging: | Available in 5 and 20 Litres |
Related Products
RODO Paddle Mixer
Ideal for use as an attachment to a drill to enable the thorough mixing of paints and coatings.
From
£9.24
£7.70
Hempel Hempaxane Light 55030
A protective enamel coating for structures found in severe atmospheric conditions and is Network Rail approved.
From
£265.33
£221.11
Hempel Galvosil 15700
A two-component, solvent-borne, self-curing, inorganic zinc silicate with outstanding resistance against weathering and abrasion.
£238.50
£198.75
Hempel Tool Cleaner 99610
For cleaning of tools that have been used for mixing or application of two-component epoxy products.
From
£33.71
£28.09
Hempel Thinner 08450
Perfect for use with the Hempadur range of marine coatings and can also be used to clean any painting tools.
From
£33.59
£27.99
Hempel Hempadur Mastic 45880
A self-primed, surface tolerant coating with low temperature curing properties, low VOC and high film build.
From
£63.74
£53.12
Centrecoat WFT Wet Film Thickness Comb Gauge
An important tool to measure the depth of paint and coatings applied to substrates to ensure the correct thicknesses are applied.
£2.34
£1.95
Hempel Hempadur Quattro 17634
A universal epoxy and self-primed high performance coating system.
From
£191.24
£159.37