Hempel Hempadur Multi-Strength 35840
Hempel Hempadur Multi-Strength 35840 is a solvent-free, two-component,high-build, polyamine adduct cured glass flake containing epoxy paint, which cures to a hard and tough coating with good resistance to abrasion, seawater and fresh water. Meets requirements to NORSOK M-501 when used as part of apredefined paint system
Best Uses
Hempadur Multi-Strength 35840 is best used as a self-primed, high build coating for areas that are subject to a highly corrosive environment. For example, this product can be used on pilings, offshore structures, splash zones and other immersed areas.
Certificates / Approvals
Third-party verified, product-specific Environmental ProductDeclaration (Type III EPD, ISO 14025, EN 15804)
Meets requirements to NORSOK M-501 when used as part of apredefined paint system. Edition 6, System 7A, 7B. Edition 7,System 7A.
Application
Always ensure that the area to be painted is fully prepped before application. To begin remove any oil, grease and other contaminants by suitable detergent cleaning. Remove salts, detergents and other contaminants by high pressurefresh water cleaning.
New build:
Abrasive blasting to min. Sa 2½ (ISO 8501-1) / SP 10 (SSPC).
All damage of shopprimer and contamination from storage andfabrication should be thoroughly mechanically/chemically cleanedprior to final painting.
Remove dust, blast media and loose materials.
Maintenance and Repair:
Spot abrasive blasting to min. PSa 2 (ISO 8501-2) / SP 6 (SSPC).
Minor areas can be cleaned by power tool to St 3 provided thesurface is roughened and not polished.
Water jetting to min. Wa 2 (ISO 8501-4).
Flash rust degree of maximum FR M (ISO 8501-4).
Remove dust, blast media and loose materials.
Roughness: Surface profile Medium (G) (ISO 8503-2).
The recommend application method is by airless spray. Please read and follow the attached full application guide. if you have any questions please contact our Technical Team who will be happy to help.
Certificates and Approvals
- Third-party verified, product-specific Environmental Product Declaration (Type III EPD, ISO 14025, EN 15804)
- Meets requirements to NORSOK M-501 when used as part of apredefined paint system. Edition 6, System 7A, 7B. Edition 7,System 7A.
Features
- Glass flake shade 1115G and 5063G are compliant with the requirements of ISO 24656, Annex D Cat. V.
Technical info
| Components: | Two Component |
| Type: | Solvent-free |
| Finish: | Glossy |
| Stock Colours: | Light grey 11150 |
| Tintable: | No |
| VOC Content: | 23 g/L |
| Volume Solids: | 100% |
| Suitable Substrates: | Pilings, offshore structures,splash zone and other immersed areas |
| Application Method: | Airless Spray, Brush |
| Theoretical Coverage: | 2 m²/L |
| Wet Film Thickness (WFT): | 501µm |
| Dry Film Thickness (DFT): | 500µm |
| Induction Time: | - |
| Pot Life: | 60 minutes at 20°C |
| Hard Dry: | 7 hours at 20°C |
| Through Dry: | 23 hours at 20°C |
| Fully Cured: | 7 days at 20°C |
| Cleaner / Thinner: | Do not thin. Clean tools with Hempel Tool Cleaner 99610 |
| Shelf Life: |
Base: 36 months from date of production unopened Curing Agent: 12 months from date of production unopened |
| Packaging: | Available in 20 Litres |
