Hempel Polyenamel 55102 is a two-component, high-gloss acrylic polyurethane enamel cured with aliphatic isocyanate, with good gloss and colour retention.
Hempel Polyenamel 55102 is formulated as a glossy decorative topcoat in severely corrosive atmospheric environments on properly prepared metals such as aluminium, stainless steel and galvanized steel. Excellent adhesion on wood and glassfibre reinforced polyester also.
Prepare the substrate according to specification. The surface must be completely clean and dry at the time of application and its temperature must be above the dew point to avoid condensation. Minimum temperature for curing is: -10°C/14°F. Colour stability for some shades may be effected by exposure to harsh chemical atmospheres. This does not affect the performance of the coating. For certain colours extra coats may be necessary to obtain full opacity.
The type and amount of thinner depend on application conditions, application method, temperature, ventilation, and substrate.
Conventional air spray: Dilute to a suitable viscosity, depending on the equipment and temperature. Contact our technical team for further details. For both kinds of spray application the best result is obtained by applying a mist coat of the product at first, and then 2-15 minutes later apply to full film thickness giving a uniform film formation. Do not exaggerate the film thickness.
- Complies with European Fire Standard EN 13501-1; classification B-s1, d0
- Complies with EU Directive 2004/42/EC: subcategory j
|Type:||Acrylic Polyurethane Enamel|
|Stock Colours:||10000 White|
|Tintable:||Yes, to most RAL or British Standard codes. Please note, bespoke tints are non refundable / exchangeable|
|VOC Content:||435 g/L|
|Suitable Substrates:||For properly prepared metals such as aluminium, stainless steel and galvanized steel. Excellent adhesion on wood and glassfibre
|Application Method:||Airless spray / Air spray / Brush|
|Theoretical Coverage:||14.9 m2 per litre at 35 microns|
|Wet Film Thickness (WFT):||75 microns|
|Dry Film Thickness (DFT):||35 microns|
|Pot Life:||Approx 2 hours at 20°C|
|Surface Dry:||2 hours at 20°C|
|Overcoatable:||See data sheet|
|Fully Cured:||7 days at 20°C|
|Cleaner / Thinner:||Clean up with HEMPEL'S THINNER 08080 or 08510|
|Shelf Life:||3 years for BASE and 1 year (25°C/77°F) for CURING AGENT from time of production|
|Packaging:||Available in 5 and 20 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.