Hempel Profair 35290

A two component epoxy filler for profiling large areas of yachts above and below the waterline.

Available in 1 Litre in 30540 Light Blue

2. Select a Qty

As low as:

£58.64

Inc VAT £70.37

PRODUCT DETAILS

Hempel Profair 35290 is a light-weight epoxy filler for yachts, that has good adhesion and water resistance. It is ideal for detailed fairing where structural strength and flexibility is required.

Best Uses

Hempel's Profair is suitable for both interior and exterior use, both above and below the waterline. It can be used on substrates including glass fibre, hardwood and steel.

Application

Always ensure any oil, grease or other contaminants are removed with a suitable detergent before application of Profair.

When applying to a new build:

Uncoated surface: Sand and remove all dust.
Prime with 1-2 coats of specified Hempel's Primer.

For Maintenance and Repair:

Previously coated surfaces should be Abraded, cleaned and dried.

Hempel Profair can be applied in a thickness up to 25mm. Once dried, it can be overcoated with 2 coats of recommended Hempel primer. Please note that topcoat finishes should not be applied directly on top of Profair 35290.

TECHNICAL

Components:	Two Component
Type:	Epoxy
Finish:	Semi-Gloss
Stock Colours:	Light blue 30540
Tintable:	No.
VOC Content:	22 g/L
Volume Solids:	98 ± 2%
Suitable Substrates:	Glass fibre, hardwood, steel and other rigid materials
Application Method:	Putty knife
Theoretical Coverage:	1 m²/L
Wet Film Thickness (WFT):	1000 µm
Dry Film Thickness (DFT):	1000 µm
Induction Time:	-
Pot Life:	1 hour at 20°C
Touch Dry:	12 hours at 20°C
Ready To Sand:	24 hours at 20°C
Overcoatable:	24 hours at 20°C
Fully Cured:	7 days at 20°C
Cleaner / Thinner:	Do not thin. Clean using either Hempel Thinner 08451 or Degreaser 99611
Shelf Life:	18 months from date of production unopened
Packaging:	Available in 1 Litre