Used on porous wood and concrete surfaces to ensure adhesion and protection of Anti Slip Tapes.
Available in 500ml and 1 Litre
3. Select a Qty
As low as:
£19.11
Inc VAT£22.93
As low as:
Inc VAT
PRODUCT DETAILS
Centrecoat Anti Slip Tape Adhesive Primer has been designed for priming surfaces prior to the application of anti slip tapes and offer maximum adhesion for a longer lasting product lifetime.
Best Uses
Anti Slip Tape Adhesive Primer can be used in all tricky and difficult areas where anti slip tape may not adhere to the surface properly due to conditions or environments and works to create a better bond.
Application
Centrecoat Anti Slip Tape Adhesive Primer can be applied using brush or roller and offers excellent flow and application properties to ensure a smooth process. This top of the range primer has a theoretical coverage rate of 5m2 per litre and is highly adhesive.
Surface and Environment
Anti Slip Tape Adhesive Primer can be used on all porous surfaces such as wood, concrete and stone and works to prevent any moisture or water attacking the bottom layer of the adhesive from below ground level by blocking the pores and capillaries found in the substrate.
TECHNICAL
Features
This primer is ideal for use for on porous surfaces (wood, concrete, stone etc) it prevents any water attacking the adhesive from underneath.
Helps in all situations to create better bond for anti slip tape in difficult areas.
Components:
One Part
Type:
Finish:
-
Stock Colours:
Clear
Tintable:
No
VOC Content:
Volume Solids:
0%
Suitable Substrates:
For wood, concrete or stone prior to application of our anti slip tape to prevent moisture degrading the adhesive; it also greatly helps to create an extra bond on other surfaces
Application Method:
Brush, Roller, Air Atomised Spray or Airless Spray
Navigating through the elements of the carousel is possible using the tab key. You can skip the carousel or go straight to carousel navigation using the skip links.
Press to skip carousel
