International Interlac 497 is a single pack alkyd undercoat for external and internal use above water.
International Interlac 497 is a single pack undercoat for use on internal and external areas above water. For use at Newbuilding, Maintenance & Repair or On Board Maintenance.
Use in accordance with the standard Worldwide Marine Specifications. All surfaces to be coated should be clean, dry and free from contamination. High pressure fresh water wash or fresh water wash, as appropriate, and remove all oil or grease, soluble contaminants and other foreign matter in accordance with SSPC-SP1 solvent cleaning.
Preparation: NEWBUILDING/MAJOR REFURBISHMENT
Interlac 497 should always be applied over a recommended primer coating scheme. The primer surface should be dry and free from all contamination, and Interlac 497 must be applied within the overcoating intervals specified (consult the relevant product data sheet). Areas of breakdown, damage etc., should be prepared to the specified standard (e.g. Sa2½ (ISO 8501-1:2007) and primed prior to the application of Interlac 497
Repair corroded areas with an appropriate International Paint primer (consult the primer data sheet).
|Stock Colours:||CRB000 White, CRE939 Blue, CRY999 Black|
|VOC Content:||391 g/L|
|Volume Solids:||52% ±2%|
|Suitable Substrates:||For use on internal and external areas above water|
|Application Method:||Airless Spray, Brush, Conventional Spray, Roller|
|Theoretical Coverage:||13 m2 per litre at 40 microns DFT, allow appropriate loss factors|
|Wet Film Thickness (WFT):||77 microns|
|Dry Film Thickness (DFT):||40 microns|
|Touch Dry:||10 hours at 5°C|
|Overcoatable:||Between 30 hours and 14 days at 5°C|
|Hard Dry:||24 hours at 5°C|
|Cleaner / Thinner:||International GTA004. Thinning is not normally required|
|Shelf Life:||24 months minimum at 25°C. Subject to reinspection thereafter. Store in dry, shaded conditions away from sources of heat and ignition|
|Packaging:||Available in 5 and 20 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.