Johnstones Trade 2 Pack Anti Graffiti Glaze is suitable for application over the top of Johnstones Trade 2 Pack Anti Graffiti Finish to provide a seamless tile-like surface enabling easy removal of graffiti, grease and other contaminants.
Johnstones Trade 2 Pack Anti Graffiti Glaze is suitable for application over the top of Johnstones Trade 2 Pack Anti Graffiti Finish to provide a seamless tile-like surface enabling easy removal of graffiti, grease and other contaminants in internal and external areas prone to graffiti. This glaze provides a class 0 fire rated clear satin finish.
All surfaces to be coated should be clean, dry and free from loose and friable material. When applying directly over brick or stonework, use a wire brush to remove all loose material. Prime bare surfaces as appropriate. Treat mould or fungal growth with fungicidal wash as directed. Special precautions should be taken during surface preparation of pre-1960’s paint surfaces over wood and metal as they may contain harmful lead.
The base and activator should be mixed together. Do not mix part units. Ensure that the components are completely mixed together before application. Apply 2 coats by brush or roller. The mixture must be used within 4 hours of mixing. Do not apply in temperatures below 10ºC.
|Type:||Water Based Polyurethane|
|VOC Content:||80.0g per Litre|
|Suitable Substrates:||For brick, masonry, natural stonework and previously painted surfaces|
|Application Method:||Brush, Roller|
|Theoretical Coverage:||10 - 12 m2 per litre at 50 microns|
|Wet Film Thickness (WFT):||100 microns|
|Dry Film Thickness (DFT):||36 microns|
|Touch Dry:||2 hours at 20°C|
|Overcoatable:||After 8 - 72 hours at 20°C|
|Cleaner / Thinner:||Do not thin|
|Shelf Life:||5 years|
|Packaging:||Available in 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.