Johnstones Trade Flame Retardant Acrylic Matt is a water-borne, flame retardant coating designed to maintain a surface that inhibits the spread of flame. For use over new non-combustible or previously painted surfaces.
Johnstones Trade Retardant Acrylic Matt provides a quick dry, low odour formulation making it ideal for use on internal wall surfaces and ceiling areas where a durable, washable hard wearing finish is required. For use on internal linings, broad wall and ceilings. Johnstones Trade Retardant Acrylic Matt inhibits spread of flame providing a flame retardant coating.
Surfaces must be sound, clean, dry and free from all loose and flaking materials, dirt, grease or other surface contaminants. Rub down previously painted surfaces with a fine waterproof abrasive paper and rinse thoroughly. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. New or bare surfaces should be coated with a mist coat of Johnstone’s Flame Retardant Durable Matt thinned with up to 10% clean water. Special precautions should be taken during surface preparation of pre-1960’s paint surfaces as they may contain harmful lead.
Stir thoroughly before use. Apply two coats by brush, roller or spray as required. For spray applications, thinning may be required. Airless Spray = 017-019 thou tip, 200 bar (2000-3000 psi). An additional coat may be required if thinning to meet the required film build for the flame testing.
IMPORTANT INTUMESCENT PRODUCT NOTE: Always contact Promain’s technical team prior to purchase to obtain a tailored project specification and the advice necessary. The information displayed on this website should only be used as a guide. Promain UK Limited will not be held liable for any resulting damage to property, human life or monetary costs incurred due to incorrect specification, preparation, application or maintenance that has occurred due to negligence by either the purchaser or applicator. This includes your failure to have contacted us to obtain the relevant advice/specification.
|Tintable:||Available in 16,000 colours via the Johnstone’s Tinting System. Please note, bespoke tints are non refundable / exchangeable.|
|VOC Content:||140.0g per Litre|
|Suitable Substrates:||For use over new non-combustible or previously painted surfaces|
|Application Method:||Brush, Roller or Spray|
|Theoretical Coverage:||10 m2 per litre|
|Wet Film Thickness (WFT):||83 microns|
|Dry Film Thickness (DFT):||28 microns|
|Overcoatable:||After 4 hours at 20°C|
|Cleaner / Thinner:||Water|
|Shelf Life:||5 years|
|Packaging:||Available in 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.