Bollom Flameguard Ultra Primer / Undercoat
Bollom Flameguard Ultra Primer / Undercoat is a specialist, adhesion promoting, stain blocking primer, used as part of a fire protection system on non-combustible surfaces, prior to the application of Flameguard Ultra Topcoat.
Best Uses
Bollom Flameguard Ultra Primer / Undercoat has been developed to offer excellent adhesion even when applied on masonry surfaces that have been coating with up to 10 layers of conventional paint, with no need to strip them. This prime has been designed solely for use in internal applications for a hard wearing finish.
Application
Bollom Flameguard Ultra Primer / Undercoat can be applied using brush or roller for a finish that provides a high level of adhesion and hard wearing results. With fast drying characteristics, you can touch the surface after 2 hours and recoat the surface after 4 hours.
IMPORTANT INTUMESCENT PRODUCT NOTE: Always contact Promain’s technical team prior to purchase to obtain a tailored project specification and the advice necessary. The information displayed on this website should only be used as a guide. Promain UK Limited will not be held liable for any resulting damage to property, human life or monetary costs incurred due to incorrect specification, preparation, application or maintenance that has occurred due to negligence by either the purchaser or applicator. This includes your failure to have contacted us to obtain the relevant advice/specification.
Surface and Environment
Bollom Flameguard Ultra Primer / Undercoat can be applied to all bare and previously painted, non-combustible surfaces such as plaster, cement, concrete, and old paint work, and is highly suited for blocking stains on porous surfaces, providing the perfect base coat for Flameguard Ulta Top coat finishes.
Features
- Excellent adhesion
- Ideal for previously painted surfaces
- Class 0 fire rating
- Interior use
- Hard wearing finish
- flameguard-ultra-primer
Technical Info
| Components: | Single Pack |
| Type: | Primer/Undercoat |
| Finish: | Matt |
| Stock Colours: | White |
| Tintable: | Yes. Please note, bespoke tints are non refundable / exchangeable |
| VOC Content: | Max 30g/l |
| Volume Solids: | - |
| Suitable Substrates: | Bare and previously painted non-combustible surfaces |
| Application Method: | Brush or Roller |
| Theoretical Coverage: | 12m2/litre per coat. One coat required |
| Wet Film Thickness (WFT): | Please contact our Technical Team |
| Dry Film Thickness (DFT): | Please contact our Technical Team |
| Induction Time: | Please contact our Technical Team |
| Pot Life: | - |
| Touch Dry: | 4 hours at 20°C |
| Overcoatable: | Allow to dry for a minimum of 4hrs at 20°C before applying Flameguard Ultra Top Coats |
| Fully Cured: | 8 hours at 20°C |
| Cleaner / Thinner: | Flameguard Ultra Primer must not be thinned. Clean equipment with warm water |
| Shelf Life: | See tin for shelf life and storage information |
| Packaging: | Available in 5 Litres |
