Johnstone's Trade Stormshield Pliolite Based Masonry Finish

SKU
id16808
UN1263 (Class: 3, Pk Grp: III)
A premium quality, solvent-based masonry paint formulated for exterior use on cement rendering, rough cast, brick and concrete.
Available in 5 Litres
From £64.16 £53.47
In stock
Only %1 left
Product Description

Johnstone’s Stormshield Pliolite Based Masonry Finish is a premium quality, solvent-based masonry paint formulated for exterior use on cement rendering, rough cast, brick and concrete.

BBA Approval Logo

Best Uses

Johnstone's Stormshield Pliolite Based Masonry Finish is ideal for external wall paint application to concrete, cement rendering, brick, stone, blockwork and pebble dash. Pliolite provides a smooth matt finish that has excellent adhesion to previously painted and suitably sealed surfaces. The Pliolite resin enables application at temperatures down to -5°C and becomes shower proof in 20 minutes, allowing all year round exterior decoration.

  • Over 15 years life expectancy
  • Shower proof in 20 minutes allowing all year round application
  • A solvent-borne smooth matt coating for exterior walls
  • Excellent adhesion to previously painted or untreated porous surfaces

Application

All surfaces to be painted should be clean, dry and free from loose and flaking material. Repair cracks and defective areas and treat fungal or algal growth with Johnstone’s Sterilisation Wash as directed. Stir well. Easy to apply by brush or roller. Seal absorbent surfaces with a coat of Stormshield Stabilising Solution applied as directed. If more than one can of a colour is to be used in the same area, intermix before use.

Technical Details

Approvals

  • BBA Approved - Certificate No.95/3145

Technical Info

Finish: Matt
Stock Colours: Ivory, Magnolia, Country Cream, Florence, Strawberry Dawn, Mushroom, Spring Daffodil, Parchment, Bouquet, Petal, Nu-Stone, Marzipan, Willow Green, Harbour, Heather, Sandstone, Nectar, Ming Blue, Electra, Brick, Silver, Rumba, Safari, Sapphire, Fiesta Red, Dark Grey, Antique, Dark Green, Midnight and Tawny
Tintable: Yes, to Johnstones Colour Range. Please note, bespoke tints are non refundable / exchangable.
VOC Content: High VOC content 25–50%
Volume Solids: 33%
Suitable Substrates: Concrete, cement rendering, brick, stone, blockwork and pebble dash
Application Method: Brush or roller
Theoretical Coverage: Approximately 6m2 per litre, depending on the nature and porosity of the surface
Wet Film Thickness (WFT): 125μm
Dry Film Thickness (DFT): 41μm
Touch Dry: 1-2 hours. Showerproof in 20 minutes allowing all year round application
Recoatable: 16–24 hours under normal drying conditions
Cleaner / Thinner: White Spirit or Turpentine Substitute.
Shelf Life:
Packaging: 5 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use