Teknos Siloksan Façade is a water-borne, full-matt silicone emulsion based masonry paint for mineral surfaces. The paint is very permeable and water-repellent. It is free of solvents that contain aromatics.
Teknos Siloksan Façade is formulated for use on mineral external masonry such as concrete, plaster, lime-sand brick, lime based renders and mineral boards. Suitable for application onto new and previously painted facades outdoors.
Teknos Siloksan Façade silicone emulsion paint is easy to apply with roller or spray. Its binder composition prevents the paint from becoming brittle by the action of UV-light or heat. As Teknos Siloksan Façade is water-repellent it keeps clean even in urban climate, and acid gases in the atmosphere do not corrode it. Teknos Siloksan Façade can be overcoated the same day . It does not require any separate priming coat on most unpainted or previously painted surfaces, when Teknos Silosan Gel is added into the paint for the first coat.
New concrete element or cast surfaces can be painted with SILOKSAN FACADE when a minimum of one month has passed after the casting, the surface is completely bound and no longer wet or matt moist. In measurements the moisture values of the concrete must be under 97% as relative humidity (RH) or 4% as
per cent by weight. It is recommended that new plaster surfaces are coated only after a hardening time of 6-8 weeks. Remove all dirt from the surfaces by cleaning with high pressure washer. When needed, add sand to the washing water or use a steel brush or similar in order to achieve sufficient surface profile (e.g. mould-cast
surfaces).NOTE! When painting concrete elements take care of removing the laitance before painting. When handling substrates containing asbestos, regulations given by authorities must be followed.
PREVIOUSLY PAINTED SURFACES:
Remove flaking and poorly adherent or pulverized (e.g. lime wash) paint coats from previously painted surfaces. The method to be used is chosen depending on the strength of the substrate and the type of the paint to be removed (e.g. wire-brushing, hot pressurized-water cleaning or water-sand cleaning). Remove also poorly adherent, brittle plaster and concrete surfaces. Check the condition of the concrete seams and repair where required. If concrete constructions have cracks by the reinforcement bars, these cracks are to be opened by e.g. chipping or with a grinding machine. After this the concrete is roughened, if required. Clean all rust from the
exposed steel bars and protect them with e.g. a coat of Teknos Inerta Mastic epoxy coating. Use appropriate mortar, on plaster surfaces repair mortar, to repair the opened cracks and dents. Finish the repaired areas carefully and let them harden before they are painted.
Before use stir the paint thoroughly.
Prime clean and solid mineral surfaces with Teknos Siloksan Façade Silicone Emulsion Paint with an addition of Teknos Siloksan Gel (9 : 1). For priming the paint may be diluted by 5% with water. This priming can also be used for previously painted surfaces.
|Stock Colours:||Only Tints|
|Tintable:||To Siloksan Colour Card and RAL, BS Shades. Please note, bespoke tints are non refundable / exchangeable|
|VOC Content:||40.0g per Litre|
|Suitable Substrates:||New and previously painted facades outdoors, e.g. concrete, plaster, lime-sand brick and mineral boards.|
|Application Method:||Roller or Spray|
|Theoretical Coverage:||4 - 6 m2 per litre|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):|
|Dust Free:||30 minutes at 23°C|
|Overcoatable:||After 2 - 3 hours at 23°C|
|Cleaner / Thinner:||Water|
|Shelf Life:||See side of tin|
|Packaging:||Available in 2.7, 9 and 18 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.