Remmers Color LA

SKU
ID24728
Non Hazardous
A true silicone resin exterior masonry paint with film preservative for surfaces at risk of infestation with algae or fungi.
Available in 5 and 12.5 Litres. Tintable to pastel BS and RAL shades.
From £96.11 £80.09
In stock
Only %1 left
Product Description

Remmers Color LA is a true silicone resin exterior masonry paint with film preservative for surfaces at risk of infestation with algae or fungi.

Best Uses

Remmers Color LA is suitable for application to porous mineral building materials externally, load-bearing silicate, silicone and matt dispersion coatings and synthetic resin renders.

  • Water repellent w ≤ 0.1 kg / (m2 h ∙ 0.5)
  • Highly water vapour diffusion capable sd ≤ 0.05 m
  • Does not inhibit carbonation
  • Low-stress
  • Matt, mineral character
  • Low soiling tendency

Application

Substrate must be dry, clean, free of dust and cracks and capable of supporting a coating. Ensure substrate is free from laitenance and efflorescence. Use Remmers Impregnation Primer to prime mineral substrates capable of supporting a load. Use Remmers Primer SV or Remmers Hydro Deep Primer to prime any sanding, firmly adhering substrates. If necessary, adjust the texture using Remmers Silicone Resin Color LA Fill.

Stir well. Coat the surface using a suitable tool such as brush, roller or spray. Apply the material in 2 coats, depending on the condition of the substrate. Wait at least 6 hours between coats at 20°C.

Technical Details

Possible System Products

Technical Info

Components: Single Pack
Type: Silicon Resin
Finish: Matt
Stock Colours: White
Tintable: Yes, to non intense RAL or British Standard codes. Please note, bespoke tints are non refundable / exchangeable
VOC Content:  
Volume Solids:  
Suitable Substrates: Exterior porous, mineral building materials in outdoor areas, load-bearing silicate, silicone and matt dispersion coatings, synthetic resin renders
Application Method: Brush, surface brush, lamb's wool roller and airless spraying equipment
Theoretical Coverage: Approx. 0.2 - 0.25 Litres per m2 per coat
2 coats required.
Application rates may vary depending on the condition of the surface. Apply to a large enough trial area to determine the precise amount required.
Wet Film Thickness (WFT):  
Dry Film Thickness (DFT):  
Induction Time: -
Pot Life: -
Surface Dry:  
Overcoatable: After 6 hours at 20°C
Fully Cured:  
Cleaner / Thinner: Clean tools with water while the material is still fresh. Clean splashed material with water while the material is still fresh.
Shelf Life: If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.
Packaging: Available in 5 and 12.5 Litres
Product Data Sheet (288.53 kB)
Safety Data Sheet (197.62 kB)

Related Products