Teknos Siloksan Gel Additive

Non Hazardous
A water-borne gel containing polysiloxane for use together with Teknos Siloksan Façade Silicone Emulsion Paint on mineral surfaces.
Available in 1 Litre
£48.97 £40.81
In stock
Product Description

Teknos Siloksan Gel Additive is a water-borne gel containing polysiloxane for use together with Teknos Siloksan Façade Silicone Emulsion Paint on mineral surfaces (the SILOKSAN method). Saves from 1-3 separate primings and saves thus also application costs.

Best Uses

Teknos Siloksan Gel Additive will improve the water-repellent qualities of the substrate by preventing rain and splash water from penetrating into the structures. Allows water vapour from the structure to penetrate. Diminishes seepage of salts to the surface of the structure. Teknos Siloksan Gel should be only used with Teknos Siloksan Façade.

  • CE Approved
  • Suitable for lime surfaces
  • Permeable
  • Water repellent


Mix with Teknos Siloksan Façade Silicone Emulsion Paint before painting, in the ratio 9 litre paint to 1 litre gel. Stir by e.g. drilling machine for a minimum of 5 minutes.
The application is done according to instructions given for Teknos Siloksan Façade Silicone Emulsion Paint. NOTE! The ready mixed paint must be used within the same working day (<18 h). The paint can be used after this time, but the water-repellent properties will be weakened and are then approximately the same as for the top coat.

Technical Details
Components: One Part
Type: Water Borne Gel
Finish: -
Stock Colours: -
Tintable: -
VOC Content: 30.0g per Litre
Volume Solids: 80%
Suitable Substrates: For use with Siloksan Facade Paint
Application Method: -
Theoretical Coverage: -
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): -
Induction Time: -
Pot Life: -
Touch Dry: 2 hour at 23°C
Overcoatable: After 2 - 3 hours at 20°C
Fully Cured:
Cleaner / Thinner: Water
Shelf Life: See side of tin
Packaging: Available in 1 Litre

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.