After mixing with water (ratio 1 part Keim Ecotec to 9 parts water) Keim Ecotec is used as an environmentally friendly, solvent free, colourless water repellent, also suitable for use as a dust suppressant.
Diluted Keim Ecotec should be applied with low pressure spray and in a flood coat manner, or saturated with a brush from top to bottom.
Keim Ecotec is to be mixed to a ratio of 1:9 with clean cold water (1 part Keim Ecotec + 9 parts water). This mixture is to be used within 24 hours of mixing. The consumption is dependant on the capillary absorbency and pore structure of the surface and is between 0.2 litres per m2 and 0.8 litres per m2 (premixed). The proportion of Keim Ecotec equates to 0.02 litre per m2 - 0.08 litre per m2.
All loose, flaking and unstable material must be identified and then thoroughly removed, all surfaces must be thoroughly washed down with clean cold water to remove all surface dirt and dust. When all surfaces are clean, sound, wind dry, dust free and free from all surface contaminants, application of Keim Ecotec may proceed.
For the best finish possible, Promain recommend the use of KEIM's Facade Brush for the best application.
|Material Characteristics:||Approx. 1.0g/cm3|
|Application Method:||Low pressure spray|
|Theoretical Coverage:||Between 0.2lt/m2 and 0.8lt/m2 (premixed). The proportion of Keim Ecotec equates to 0.02lt/m2 – 0.08lt/m2.|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Cleaner / Thinner:||Clean tools with water immediately after use|
|Shelf Life:||Approx 9 months if kept cool, away from direct sunlight and in tightly closed containers|
|Packaging:||Available in 1 Litre containers|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.