Jotun Penguard Express B11

SKU
id17038
Part A and B: UN1263 (Class: 3, Pk Grp: III)
A fast drying, two pack zinc phosphate pigmented, high solids and high build paint. Highways Approved Item No. 111.
Available in 20 Litres in Grey
£210.28 £175.23
In stock
Product Description

Jotun Penguard Express B11 is a two component amine cured epoxy coating suitable for use on bridges and highway infrastructure structures. UK Highway Agency Item No.111.

BBA Approval Logo

Penguard Express B11 is a two component amine cured epoxy coating. It is a fast drying, zinc phosphate pigmented, high solids, high build paint coating. It conforms to the requirements of BS5493:1977.

Best Uses

Jotun Penguard B11 has been formulated as high solids fast drying, zinc phosphate pigmented, high build paint coating. Penguard B11 has been designed predominantly for use in new construction or for maintenance applications where a fast turn round and return to service is required. A further benefit of the Penguard B11 is it is suitable for use as a primer, mid coat, finish coat or also as as single coat system when subject to normal atmospheric conditions.

Ideal for new construction or maintenance where fast dry to handle and over coating times are required Penguard Express is surface dry 1.5 hours at 23°C.

Penguard Express can be used as primer, mid coat, finish coat or as single coat system in atmospheric environments. Suitable for correctly prepared carbon steel, aluminium, concrete and galvanised steel substrates. It can be applied at sub zero surface temperatures.

Approved to meet the requirements of UK Highway Agency Item No.111, for use on bridges and highway infrastructure and other steel structures used in the construction and marine industries.

Application

Phenguard B11 should be applied to properly prepared (sand blasted) carbon steel, aluminium, concrete as well as galvanised steel substrates. Penguard can be applied to surfaces that are below zero but this will increase drying times, see data sheet for more information.

Technical Details

Approvals

  • Approved to meet the requirements of UK Highway Agency Item No.111
  • BBA HAPAS Certified for the corrosion protection of sturctural steelwork in highway applications

Technical Info

Components: Two Part
Type: Amine cured epoxy coating
Finish:  
Stock Colours: Grey
Tintable: No
VOC Content: 290.0g per litre
Volume Solids: 70%
Suitable Substrates: Properly prepared carbon steel, aluminium, concrete and galvanised steel substrates
Application Method: Airless Spray or Brush
Theoretical Coverage: 9.3 - 2.8m2 per litre
Wet Film Thickness (WFT): 110 - 360 microns
Dry Film Thickness (DFT): 75 - 250 microns
Induction Time: -
Pot Life: 2 hours at 23°C
Touch Dry: 4 hours at 10°C
Overcoatable: 4 hours at 10°C
Fully Cured: 8 days at 10°C
Cleaner / Thinner: Jotun Thinner No. 17
Shelf Life: 12 months for Part A, 24 months for Part B
Packaging: Available in 5 and 20 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.