KEIM Design Fixativ

Non Hazardous
A pre treatment dilution primer for highly absorbent substrates for Keim Design Lasur systems.
Available in 5 Litres
£145.50 £121.25
In stock
Product Description

Keim Design Fixativ is used as pre treatment for highly absorbent substrates and as dilution for Keim Design Lasur.

Best Uses

Keim Design Fixativ is a dilution and primer formulated for the Keim Design Lasur system. Keim Design Fixativ Dilution is weather and UV resistant, non flammable, and water vapour permeable. This product is non film forming, microporous and has no solvents and plasticisers added.


All loose, flaking and unstable material must be identified and then thoroughly removed, all surfaces must be thoroughly washed down with clean cold water to remove all surface dirt and dust. When all surfaces are clean, sound, wind dry, dust free and free from all surface contaminants, application of Keim Design Fixativ may proceed.

Keim Design Fixativ should be applied by brush or roller, working well into all surfaces. After a minimum period of 12 hours the Keim Design Lasur system may be applied. Cover surfaces which are not to be painted, in particular glass, natural stone, ceramics etc.

Keim Design Fixativ is part of the extensive range of Keim products available from Promain.

Technical Details
Components: Single Pack
Type: Sol-silicate based dilution
Finish: -
Appearance: Milky
Tintable: No
Suitable Substrates: Used as a pre-treatment for highly absorbent substrates
Application Method: Brush or Roller
Theoretical Coverage: 0.1 – 0.2lt/m2 depending on the absorbency of the substrate
Application Conditions: Ambient and substrate temperature above 5° and below 30°C
Cleaner / Thinner: Clean tools with water immediately after use
Shelf Life: Approx. 12 months, if kept cool but frost free in tightly closed containers
Packaging: Available in 5 Litres