KEIM Concrete Cleaner (Betonschnellreiniger)

SKU
id12910
UN1778 (Class: 8, Pk Grp: II)
A silicic acid based cleaning concentrate to remove contamination and mould release agents from concrete surfaces.
Available in 5 Litres
£147.26 £122.72
In stock
Product Description

KEIM Concrete Cleaner is a silicic acid based cleaning concentrate to remove contamination and mould release agents from concrete surfaces, which, when applied, reacts to form harmless compounds.

Best Uses

KEIM Concrete Cleaner is best used in-situ on precast concrete elements and structures and lightweight concrete. Removal of release agent residues from new concrete surfaces. Keim Concrete Cleaner may also be used as a cleaning agent for existing concrete or render surfaces contaminated with oily or greasy substances.

Application

Pre-wet concrete surfaces before applying Keim Concrete Cleaner applying sufficient water to create a moist, matt surface. Concrete should be cleaned with Keim Concrete Cleaner, diluted 1 part Concrete Cleaner with 5 parts water, thoroughly brushed in to remove any traces of release oils and then washed off with clean cold water.

Technical Details

Components: Single Pack
Type: Silicic acid-based
Finish: -
Stock Colours: -
Tintable: No
Suitable Substrates: In-situ and precast concrete elements and structures and lightweight concrete
Application Method: Brush
Theoretical Coverage: Approx. 0.05 lt/m2
Application Conditions: Ambient and substrate temperature above 5°C and below 30°C
Cleaner / Thinner: Clean tools with water immediately after use
Packaging: Available in 5 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use