Centrecoat R08 Hard Surface Cleaner contains surfactants and mild solvents that have been activated for ultimate performance. This clean is non caustic, biodegradable, cost effective, low VOC and low odour. Centrecoat R08 Hard Surface Cleaner is ideal for cleaning façade cladding, roof cladding, PVC cleaning, as a degreaser, paint preparation, light graffiti cleaner, for removing grout blooms, cleaning paths and driveways as a maintenance cleaner. Also suitable for the cleaning of wooden external decking.
Always apply a test on a small inconspicuous area first. For general soiling apply 1 part to 5 part water. For extreme soiling apply 1 part to 1 part water. As a daily cleaner apply 1 part to 10 part water. Apply generous even coat (do not let dry out). Leave until product penetrates the dirt (5-30 minutes). Agitate with a brush and rinse clean or wash down with a power jet.
|Type:||Water Based Cleaner|
|VOC Content:||Low VOC|
|Suitable Substrates:||For façade cladding, roof cladding, paint preparation, PVC cleaning, light graffiti cleaning, removing grout blooms, wooden deck cleaning, cleaning up paint spills & brushes, paths & driveways maintenance|
|Application Method:||Brush, Roller, Air Atomised Spray or Airless Spray|
Dependant on substrate
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Cleaner / Thinner:||Water|
|Shelf Life:||Store away from frost and heat in a dry place: temperature between 5°C and 30°C. Shelf life is 12 months from the production batch date when kept in the original unopened container.|
|Packaging:||Available in 1 and 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.
Formulated to remove rust stains from delicate surfaces.