Lacq Rapidoil 2C

SKU
id24872
Non Hazardous
A two pack protective coloured coating for internal wooden flooring, furniture and other wooden surfaces. Protects in a single coat.
Available in 1 Litre
From £68.18 £56.82
In stock
Only %1 left
Product Description

Lacq Rapidoil 2C is a two pack protective coloured coating suitable for internal wooden flooring, furniture and other wooden surfaces. Protects in a single coat.

Best Uses

Lacq Rapidoil 2C is formulated to colour and protect internal wooden surfaces with a single coat. Allowing for high penetration into the wooden surface, Lacq Rapidoil 2C nourishes the wood from within.

Suitable for all wooden internal surfaces such as flooring and furniture, this 2 pack floor coating will enrich the natural look of the wood providing durable protection in a single coat.

  • 95% renewable product
  • 8 premixed colours which can be used together to form new colours
  • Completely solvent free
  • Durable against heat

Application

For Untreated wooden surfaces

Sand the surface according to the standards applied on the wood. Never sand above 120 grit. Be aware that sanding marks and other inconsistencies will be extra visible after applying Lacq Rapidoil 2C. After sanding make sure all dust and other remains are removed thoroughly.

Pour Part A and B together at a ratio of 3:1. Stir thoroughly for about 2 minutes via mechanical mixer. Before applying Rapidoil, be sure the surface is completely dry. Use a small amount of Rapidoil and apply it on parts of the total surface of approx.. 5-10m2. Apply using a lint free cloth.

Allow Rapidoil to work for a few minutes. Within 15 minutes, remove the excess oil using a clean lint free cloth. The surface must be dry to handle. Use this method for every zone.

In well ventilated rooms, the surface can be used again in just 24-36 hours. After five days the surface can be cleaned using water and a suitable soap. Tools can be cleaned using white spirit.

Please note, cloths used during application and clean up are at risk of self igniting. Always douse in copious water.

Technical Details
Components: Single Pack
Type: Solvent Free Oil
Finish:
Stock Colours: Black, Brown, Chalk White, Chocolate, Creamy White, Dark Grey, Grey, Natural
Tintable: No
VOC Content:
Volume Solids:
Suitable Substrates: Internal wooden flooring, furniture and other wood surfaces
Application Method: Lint free cloth
Theoretical Coverage: 30-50 m2 per litre depending on the wood, sanding method, applying method and pre treatment
Wet Film Thickness (WFT):
Dry Film Thickness (DFT):
Induction Time: -
Pot Life: 4 - 6 hours at 20°C
Foot Traffic: 24 - 36 hours at 20°C
Overcoatable: -
Fully Cured: 5 days at 20°C
Cleaner / Thinner: White Spirit
Shelf Life: 2 years minimum in original unopened containers.
Packaging: Available in 1 Litre
Product Video

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use