Lacq Energol provides authentic protection for all your outdoor wood surfaces, prepared in the traditional way. The combination of wood oil and linseed oil provides optimum results externally on wooden surfaces. Lacq Energol nourishes the wood from within and provides long-lasting protection. Due to the unique composition of raw materials, Lacq Energol remains flexible for a long time, allowing the product to flex with the surface of the wood.
Lacq Energol can be used on untreated wood and wood treated with a timber preservative.
Surface should be dry, dust-free and grease-free. Remove any loose and failing surface. Sanding is not necessary, only if a smooth result is desired. Weathered wood should be treated in advance with a wood colour renovator. Always sand and paint in the direction of the wood grain. Stir Lacq Energol thoroughly before use.
Apply using a flat brush, roller or spray. To ensure a neat finish, apply Lacq Energol in the direction of the wood grain. Second layer can only be applied after complete drying of the first coat of approx. 16 hours. We recommend the application of three coats onto bare wood.
After reaching the desired depth of colour in the first or second layer, Lacq Energol in Natural may be used to finish for maximum protection.
|Type:||Wood Oil / Linseed Oil|
|Stock Colours:||Autoclave Green, Black, Brown, Grey, Mahogany, Natural, White|
|Suitable Substrates:||Exterior wood.|
|Application Method:||Flat brush, roller, spray|
|Theoretical Coverage:||12 m2 per litre|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):|
|Touch Dry:||5 - 6 hours at 20°C|
|Overcoatable:||After 16 hours at 20°C|
|Cleaner / Thinner:||White Spirit|
|Shelf Life:||2 years minimum in original unopened containers.|
|Packaging:||Available in 2.5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.
Suitable for 4 inch roller refills.