Rustoleum LeakSeal a rubber coating that is flexible 100% waterproof and can be applied to metal, aluminium, PVC, masonry, asphalt roofing materials, bitumen, Upvc cladding, fibreglass.
Rustoleum have now produced LeakSeal a rubber coating that is flexible, for application to areas such as gutters and downpipes formulated to stop leaks and bridge cracks.
Rust-Oleum LeakSeal is available in a convenient 500ml aerosol spray designed to give easy application and fast drying to most hairline cracks and leaks. This easy to apply spray offers a 100% waterproofing solution to many substrates around the home and is suitable for application to bitumen roofing felt, household and commercial drain pipes, chimney edges as well as the edges of window frames.
LeakSeal is suitable for application to many substrates including metal, aluminium, PVC, masonry, asphalt roofing materials, bitumen, uPVC cladding, fibreglass and more. This unique product if formulated from the latest rubber coating technology to provide a flexible elastomeric seal with outstanding adhesion to provide a water tight seal to prevent moisture penetrating and causing corrosion and other damage. LeakSeal's coating is based on a rubber compound that creates a flexible seal that lasts under any given weather circumstances. It provides a water-tight, flexible seal that prevents moisture penetration causing corrosion.
An easy to apply aerosol simply clean the surface and remove any lose paint or rust, thoroughly dry the surface and apply several thin coat. LeakSeal can be over coated after 24 hours with most alkyd or latex based paints.
|Stock Colours:||Aluminium, Black, White, Clear|
|Suitable Substrates:||For filling and sealing leaks and cracks on metal, aluminium, galvanized metal, PVC, concrete, masonry, asphalt/bituminous roofing materials, vinyl siding, fiberglass, and more|
|Theoretical Coverage:||0.74 m2 per Aerosol at 65 microns DFT|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):||65 microns|
|Touch Dry:||20 - 30 minutes at 20°C|
Apply second layer LeakSeal after 15 - 30 minutes at 20°C.
Topcoatable with water-based or oil-based paints after 24 hours.
|Fully Cured:||1 days at 20°C|
|Cleaner / Thinner:||-|
|Shelf Life:||2 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.|
|Packaging:||Available in Packs of 6 x 500ml Aerosols|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.