Fillcoat Fibres Waterproofing seals leaks quickly, bridges small cracks easily and immediately in roofs, even when it is wet.
For instant waterproofing protection Rustoleum Mathys Fillcoat Fibres seals leaks quickly, easily and immediately in roofs, eaves, roof frames, standing edges, drains, etc. Single component product that can be used all year round - it can be applied in all weather conditions, including snow. Rustoleum Mathys Fillcoat Fibres is similar to Fillcoat but has added fibres (fibreglass), which help strengthen the repair over larger cracks up to several millimetres in width without the use of Dacfill Fleece. The fibres and the great elasticity of the product allow tears to be covered effectively.
Rustoleum Fillcoat Fibres Waterproofing is best used to create a waterproof finish on roofs, non-walkable terraces, gutters, ridge pieces and chimney stacks. Fillcoat Fibres is best used as an alternative to fillcoat, because of the added fibres, it means you can repair large cracks up to several millimetres without using dacfill fleece.
Rustoleum Fillcoat Fibres Waterproofing can be applied using brush or roller to create a waterproof finish for roofs and various other surfaces. Within 4 hours you will be provided with a touch dry coating which you can recoat after 3 days. Fillcoat Fibres can be applied even when the weather is at its worst. Apply Fillcoat Fibres crosswise over cracks to get the desired finish.
Fillcoat Fibres is designed for use on roofs, non-walkable terraces, gutters, ridge pieces, pipes and chimney stacks. This product is designed to offer excellent adhesion to various substrates to create an immediate watertight finish.
- Excellent adhesion
- Suitable for use directly onto bitumen, asphalt, felt, hard PVC, polyester, zinc, aluminium, glass and tiles
- Porous substrates (concrete, stone, wood) should be primed with primer 44 before application
- Solvent based
- Up to 1300% elasticity
- Can be applied in all weather conditions including rain and snow
- Instantly waterproof.
- Apply by brush or roller
- Touch dry: 4 hours
- Recoat: 3 - 14 days with same product. 6 weeks with paint
- Thinning not recommended
- Theoretical coverage: 1 - 1.5m2 per litre
- Cleanup: Thinner 22 or white spirit.