£9.95 delivery on orders excluding certain products & postcodes *
Rust-Oleum Dacfill Roof Paint is a water based paint for waterproofing areas such as shallow sloping roofs made from asbestos, concrete fibres, fibrous cement, plastic, felt, chimneys, etc. in 2 coats. When dry it will form a seamless rubber like layer that is watertight, without joints or seams. The paint is extremely elastic (350% after ageing) and 100% waterproof. Dacfill Roof Paint is especially good on corrugated asbestos, concrete fibre, fibrous cement, plastic and felt roofs.
Rust-Oleum Dacfill Roof Paint is recommended as a waterproofing system for roofs and chimneys slabs. Dacfill Roof Paint provides an excellent resistance to extreme variations of temperature, atmospheric pollutants and UV rays. Whether it is used in domestic or commercial applications, Rust-Oleum Dacfill Roof Paint is a necessary application for roofing leaks and damaged roofing sheets.
Dacfill Roof Paint should be applied using a brush, roller and airless spray (air-atomised spray is not recommended). This product should be applied when the weather is dry, and the temperature is above 5°C. Dacfill Roof Paint is touch dry within 2 hours and re-coatable after 24 hours.
Dacfill Roof Paint is especially good for use on corrugated asbestos, concrete fibre fibrous cement and felt roofs and is suitable for use in a range of environments, providing a finishing coat that is ultra protective against the effects of weather conditions.
Components: | One Part |
Type: | Water Based Liquid Membrane For Roofs |
Finish: | Matt |
Stock Colours: | 4 Grey |
Tintable: | Yes, Minimum Order Quantity 200 Kg. Please note, bespoke tints are non refundable / exchangeable. |
VOC Content: | 5.0g per Litre |
Volume Solids: | 60% |
Suitable Substrates: | For roofs, chimney slabs, etc. with a slope of 5% minimum |
Application Method: | Brush, Roller or Airless Spray |
Theoretical Coverage: | 1. Consumption per coat: 0.6 - 1.5 Kg per m2 (dependent of the substrate) 2. Steep roofs (without fleece): 1.3 - 2.5 Kg per m2 3. Roofs with a little slope (with fleece): 2.5 - 3 Kg per m2 (water stagnation) |
Wet Film Thickness (WFT): | 1000 micron (consumption: 1.5 Kg per m2) |
Dry Film Thickness (DFT): | 600 micron (consumption: 1.5 Kg per m2) |
Induction Time: | - |
Pot Life: | - |
Touch Dry: | 2 hours at 20°C |
Overcoatable: | After 24 hours at 20°C |
Fully Cured: | 7 days at 20°C |
Cleaner / Thinner: | Water |
Shelf Life: | 2 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C |
Packaging: | Available in 5 and 25 Kg |