Rustoleum Primer 44 HS

SKU
ID610
UN1263 (Class: 3, Pk Grp: III)
For Corrugated Fibre Asbestos roofs to improve the adherence of topcoats Rustoleum Dacfill or Rustoleum Dacfill HZ.
Available in 5 Litres in Grey
From £80.47 £67.06
In stock
Only %1 left
Product Description

Rustoleum Mathys Primer 44 is ideal for Corrugated Fibre Asbestos roofs and porous concrete. It improves the adherence of topcoats such as Rustoleum Dacfill or Rustoleum Dacfill HZ.

Solvent based fixing primer based on chlorinated rubber offering excellent fixing capacity, good UV resistance and flexibility on porous, unpainted mineral substrates. Rustoleum Mathys Primer 44 is ideal for Corrugated Fibre Asbestos roofs and porous concrete. It improves the adherence of topcoats such as Rustoleum Dacfill or Rustoleum Dacfill HZ.

Best Uses

Rustoleum 44 HS Primer is best used as an impregnating flat roof primer and for corrugate fibre asbestos roofs. One hour after application, 44 HS Primer will be water and rain resistant. Offering you excellent flexibility without cracking and solid UV resistance.

  • Excellent fixation for stabilizing loose particles
  • Prevents porous substrates from absorbing expensive coatings
  • Flexible paint withstands temperature changes
  • Quickly water-resistant (1 hour after application at 20°C)
  • Can be used on roofs, floors and walls

Application

Clean and degrease the substrate. If the substrate is an acrylic paint, this must NOT be recoated with Primer 44HS (the acrylic paint is affected by the solvents of Primer 44HS). In such a case, replace Primer 44HS with Pegafix. To ensure homogeneity, coating materials should be thoroughly stirred prior to use.

APPLICATION & THINNING: BRUSH - All types. Do not dilute.
APPLICATION & THINNING: ROLLER - All types. Do not dilute.
APPLICATION & THINNING: AIRLESS SPRAY - Do not dilute. Nozzle: 011 - 013. Pressure: 150 - 170 bars.
APPLICATION & THINNING: AIR-ATOMISED SPRAY - Do not dilute.

Surface/Environment

Rustoleum Mathys Primer 44 is ideal for Corrugated Fibre Asbestos roofs and porous concrete. Please note, Primer 44 should only be applied to a bone dry surface.

Technical Details
Components: Single Pack
Type: Solvent Based
Finish: Gloss
Stock Colours: Grey
Tintable: No
VOC Content: 599 g/l
Volume Solids: 32%
Suitable Substrates: Fixation layer for porous and unpainted mineral substrates
Application Method: Brush, Roller, Air Atomised Spray or Airless Spray
Theoretical Coverage: 5-10 m2 per litre
Wet Film Thickness (WFT): 70 microns
Dry Film Thickness (DFT): 23 microns
Induction Time: -
Pot Life: -
Touch Dry: 1 hour at 20°C
Overcoatable: After 24 hours at 20°C
Fully Cured: 24 hours at 20°C
Cleaner / Thinner: Thinner 22
Shelf Life: 2 years
Packaging: Available in 5 Litres
Product Data Sheet (819.64 kB)
Safety Data Sheet (218.55 kB)

Related Products