Rust-Oleum Mathys Pegafix Universal Impregnating Adhesion Primer
Rust-Oleum Mathys Pegafix Universal Impregnating Adhesion Primer aids the performance of water based paints.
Rust-Oleum Mathys Pegafix Universal Impregnating Adhesion Primer is a colourless product, designed for providing an adhesive coating that aids the performance of water-borne paints. Use Rust-Oleum Mathys Pegafix Impregnating Adhesion Primer on different porous and chalking substrates in order to produce a glossy finish, based on acrylic resins.
Best Uses
Rust-Oleum Mathys Pegafix Impregnating Adhesion Primer can be used as a flat roof primer, but is not limited to this, as it can be used on all porous substrates. Rustoleum Mathys Pegafix Impregnating Adhesion Primer offers a high fixing capacity, even on low porosity substrates.
Rust-Oleum Mathys Pegafix Impregnating Adhesion Primer offers excellent penetration and is the preferred choice among professionals, above Rust-Oleum Parafix and Porisol.
Application
Rust-Oleum Mathys Pegafix Universal Impregnating Adhesion Primer can be applied using brush, roller or conventional and airless spray guns in order to produce a high quality impregnating coating. Pegafix Impregnating Adhesion Primer offers a theoretical coverage rate of 5-10m2.
Surface and Environment
Rust-Oleum Mathys Pegafix Impregnating Adhesion Primer is primarily designed for flat roof priming to offer surface protection before applying a water-borne coating.Rust-Oleum Mathys Pegafix Impregnating Adhesion Primer can be used on all high porous surfaces including concrete, bricks and wood as well as low porous surfaces like plaster.
Notes
- High fixing capacity on low porosity substrates
- Pegafix is preferred above Parafix and Porisol because of its better penetration characteristics
- Based on acrylic hydrosols
- Use Pegafix Universal on different porous and chalking substrates, before painting them with waterborne paints
Technical Info
| Components: | One Part |
| Type: | Colourless impregnating primer based on acrylic hydrosols |
| Finish: | Gloss |
| Stock Colours: | Colourless |
| Tintable: | No |
| VOC Content: | 0.0g per Litre |
| Volume Solids: | 14 - 16% |
| Suitable Substrates: | For on different porous and chalking substrates, |
| Application Method: | Brush, Roller or Airless Spray |
| Theoretical Coverage: | Very Porous Substrates (concrete, bricks): 5 - 10 m2 per litre Little Porous Substrates (plaster, porous paints for inside use): 15 - 20 m2 per litre |
| Wet Film Thickness (WFT): | 100 microns |
| Dry Film Thickness (DFT): | 15 microns |
| Induction Time: | - |
| Pot Life: | - |
| Touch Dry: | 1 hour at 20°C |
| Overcoatable: | Between 2 - 4 hours at 20°C |
| Fully Cured: | 24 hours at 20°C |
| Cleaner / Thinner: | Water |
| Shelf Life: | 2 years unopened |
| Packaging: | Available in 5 Litres |
