Coo-Var Luminous Paint
Coo-Var Luminous Paint is a high visibility paint that glows in the dark and provides an effective safety aid for marking and highlighting areas such as exits and floors.
Coo-Var Luminous Paint is a high visibility paint which is useful as a safety aid, for example in highlighting/identifying doorways, exits, escape routes and fire escapes. The Coo-Var Luminous Paint should be used after the foundation paint has been applied. For external applications, the Luminous Clear Protective Coating provides resistance to weathering.
Best Uses
Coo-Var Luminous Paint can be used for creating a fluorescent option for marking lines on floors. It is a water-based and low odour product, which glows in the dark after being exposed to light. When there is no light, the paint will eventually fade until it is exposed again. As well as for safety reasons, Luminous Paint can also be used to create a theatrical effect.
Application
Coo-Var Luminous Paint should be applied using a brush and creates a translucent pale green colour with a matt finish. Luminous Paint should not be applied in conditions of less than 7°C. Coo-Var Luminous Paint will be touch dry in approximately 30 minutes (at 20°C) and reaches full hardness in 5 to 7 days. A second overcoat can be applied after 6 hours.
Surface and Environment
Coo Var Luminous Paint can be applied to metal, wood, plaster and fibreglass. This paint is designed for creating a luminous effect and glows in the dark. It is suitable for interior or exterior use.
Features
- A high visibility coating
- Provides a visual safety aid for identifying doorways and escape routes, etc.
- Suitable for interior and exterior use
- Can be used for floor marking
- Use Luminous Clear Protective top coat for external use
Technical Info
| Components: | Single Pack |
| Type: | Water Based |
| Finish: | Matt |
| Stock Colours: | Translucent pale green |
| Tintable: | No |
| VOC Content: | Max 27 g/litre |
| Volume Solids: | 39% |
| Suitable Substrates: | Apply over Foundation Base Coat to metal, wood, plaster and fibreglass |
| Application Method: | Brush |
| Theoretical Coverage: | 13 m2 per litre @ 35 microns DFT |
| Wet Film Thickness (WFT): | 75 microns |
| Dry Film Thickness (DFT): | 30 to 35 microns |
| Induction Time: | - |
| Touch Dry: | 30 minutes at 20°C |
| Hard Dry: | 2 hours at 20°C |
| Overcoatable: | After 6 hours at 20°C |
| Fully Cured: | 5 to 7 days at 20°C |
| Cleaner / Thinner: | Water |
| Shelf Life: | - |
| Packaging: | Available in 2.5 Litres |
